PWRDELETEB Command
Parameter description | Parameter name | Parameter values |
Qualified file name | QFNAME | micro file name |
Process done on which | MICLIST | *REQUESTER |
micro? | NOTIFY | device name |
Notify Operator? | *YES or *NO | |
Display status message? | DSPSTSMSG | *YES or *NO |
Use PWRDELETEB to delete a PC file on a specified micro from either a PC in emulation mode or from a dumb terminal. Issue the PWRDELETEB command from the command line and press F4 to prompt. You can also run this command in batch mode.
The PWRDELETEB parameters are described below:
QFNAME The name of the micro file to be deleted.
MICLST The device name of the micro that contains the file to be deleted.
*REQUESTER Deletes the file from the micro from which the command is initiated.
device name Deletes the file from the micro with this device name.
NOTIFY Specifies whether you will be notified if the file to be deleted is not found. Sending a message to your message queue does this.
*YES You are notified if the file is not found (the default).
*NO You are not notified if the file is not found.
DSPSTSMSG Displays program status messages during the execution of the command.
*YES Status messages are displayed (the default).
*NO Status messages are not displayed.
ETU400 User Guide 011603 |