signed on.
Each device you transfer from must be powered on, have emulation loaded, and be at the AS/400 sign- on screen.
NOTE: This parameter must be changed from *REQUESTER when you run the PWRTO3XB command in batch mode.
When you transfer the files to the host, you can specify how you want the file stored:
•In one physical file with multiple members;
•In one physical file with one member (data is stored together);
•In multiple physical files with one member each.
•To store the files in one physical file with multiple members, specify the following:
TOFILE | Enter a file name. |
Member name | *MULTI |
| The member names will be the same as the device names |
| from which the file was transferred. |
To store the files in one physical file with a single member, specify the following parameters as shown:
TOFILE | Enter a file name. |
Member name | *FILE |
| The name of the file and member will be the same as you |
| specify in the TOFILE file parameter, or you can |
| specify a separate member name. |
To store the files in multiple physical files with a single member in each:
TOFILE | *MULTI |
Member name | *FILE |
| The file and member names are the same as the device |
| names from which the file was transferred. For example, |
| if you transfer a file from a micro with the device |
| name PRT2AD3, the file and member are both named |
| PRT2AD3. |
| You must specify Data Description Specifications when |
| you request *MULTI in the TOFILE parameter. |
ETU400 User Guide 011603 |