QFNAME1 The name of the micro file to contain the data from the AS/400. For additional information, see About Microcomputer Files in Chapter 3.
MICLST The device name of the microcomputers to which the file will be transferred.
*REQUESTER Transfers the file to the micro from which the command is initiated. Use only with interactive transfers.
device name Transfers the file to the micro with this device name.
+To transfer the host file to more than one micro, enter the device name of each micro computer. (You must be authorized to use each device you specify in the MICLST parameter. If you can sign on to the device, then you are authorized to use it.) Enter a plus sign (
) and press ENTER here to display multiple prompts.
Each micro to which you transfer data must be powered on, have emulation loaded, and have the AS/400
DLTFILE Deletes the host file after it has been transferred to the micro. *NO is the default. To delete the file, specify *YES. The use of this parameter is dependent on the user's authority to the host file.
SAVTYP Must be used to transfer files that were previously transferred to the host with the *SAVE file type. The default is *NO. Specify *YES for *SAVE file types.
STRIP For source physical file transfers only: Specifies whether the first 12 bytes of each record are to be ignored when reading the file. These 12 bytes contain the sequence number and date fields for source physical files. The default is *NO. *YES strips first 12 bytes off each record during the file transfer.
TRANSLATE Determines whether the data is to be translated, and if so, what type of translation is to be performed. ETU supports four translation types:
*TEXT Translates the host file into ASCII text format. This is the default.
*DIF Translates the host file into DIF format.
*BASICS Translates the host file into BASIC Sequential format.
*TAB Translates the host file into BASIC Sequential format with tab characters as the field delimiters.
*NONE Indicates that no translation of the host file is to be performed. (Usually this is used only after the data is translated independently with the XLATETO command.)
ETU400 User Guide 011603 |
|
