Manuals / Panasonic / Computer Equipment / Computer Accessories

Panasonic KX-TDE100 Calling Party, Header Type, From Header-User Part, Shelf KX-TDE600 only, Slot

Models: KX-TDE100

1 54

Download 54 pages 18.65 Kb

Page 26

Image 26

3.1.6 Calling Party

Shelf (KX-TDE600 only)

Indicates the shelf position (reference only).

Value Range

Shelf type

Slot

Indicates the slot position (reference only).

Value Range

Slot number

Port

Indicates the port number (reference only).

Value Range

Port number

Connection

Indicates the port status.

This column offers two ways to open the screen to select the port command:

•Click the desired cell in the column.

•Select the desired cell in the column, and then click Command.

Value Range

INS: The port is in service.

OUS: The port is out of service.

Fault: The port is not communicating with the network.

Header Type

Specifies the header of the SIP message in which the caller information is stored.

Value Range

From Header, P-Preferred-Identity Header

From Header—User Part

Specifies the value to be stored in the username part of the SIP-URI of the From header.

Value Range

User Name, Authentication ID, PBX-CLIP

Programming Manual for Virtual SIP Trunk Card

Page 26

Image 26

Panasonic KX-TDE100 manual Calling Party, Header Type, From Header-User Part, Shelf KX-TDE600 only, Slot, Port, Connection

Contents

KX-TDE200/KX-TDE600 Pure IP-PBXProgramming Manual for Virtual SIP Trunk Card Model No. KX-TDE1004 Maintenance Table of ContentsIndex 1 OverviewProgramming Manual for Virtual SIP Trunk Card Section OverviewThis section provides an overview of the V-SIPGW16 card WAN Wide Area Network 1.1 Information about IP Telephony ServiceV-SIPGW16 Connection Outline Local Area NetworkDNS Domain Name System NAT Network Address Translation TraversalInternet 1.2.2 Firewall Requirements 1.2 Important Notice for Subscription and Installation1.2.1 Port Requirements Default Port NoCODEC 1.2.3 Bandwidth RequirementsRouter Requirements Packet Sending IntervalItems 1.3 SpecificationsSpecification 1.3 Specifications Programming Manual for Virtual SIP Trunk CardSection 2 Preparations for PC Programming Programming Manual for Virtual SIP Trunk CardSystem Requirements 2.1 Maintenance Console Operating Instructions2.1.1 Installing and Starting the Maintenance Console Hardware RequirementsInstalling the Maintenance Console When not using a DHCP server 7. When country/area data do not matchWhen using a DHCP server a. Select DHCP for the DNS Server Address Method settinga. Select Manual for the DNS Server Address Method setting c. Click Select Shelf 2.2 Installing the V-SIPGW16 Card to the PBX1. a. Under Configuration, click Slot Section 3 Programming the V-SIPGW16 Card Programming Manual for Virtual SIP Trunk CardProgramming Port Property Accessing Port Properties3.1 Programming the V-SIPGW16 Card-Port Property 1. Under Configuration, click SlotSlot 3.1.1 MainShelf KX-TDE600 only PortSIP Server Location-Name SIP Service Domain3.1.2 Account SIP Server Location-IP AddressUser Name Authentication IDAuthentication Password SlotRegister Sending Interval 3.1.3 RegisterRegister Ability Shelf KX-TDE600 onlyRegistrar Server-Name Un-Register Ability when port INS3.1.4 NAT Registrar Server-IP AddressSTUN Server-IP Address 3.1.5 OptionSTUN Server-Name STUN Server Port NumberSession Refresh Session Timer-Refresh Method Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Session Expire Timer Proxy-Require OptionFrom Header-User Part 3.1.6 Calling PartyHeader Type Shelf KX-TDE600 onlyP-Preferred-Identity Header-User Part 3.1.7 Called PartyFrom Header-SIP-URI P-Preferred-Identity Header-SIP-URISlot 3.1.8 Voice/FAXType PortPacket Sampling Time G.711µ IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711A SlotFAX Sending Method Packet Sampling Time G.729AVoice Activity Detection for G.711 Maximum Bit RateRTP QoS-ToS Priority 3.1.9 RTP/RTCPRTP QoS Ability Shelf KX-TDE600 onlyRTP QoS-DSCP 3.1.10 T.38RTP QoS-ToS Type RTP QoS-HEXT.38 FAX UDPTL Redundancy count for T.30 messages T.38 FAX UDPTL Error Correction - RedundancyT.38 FAX Max Datagram T.38 FAX UDPTL Redundancy count for dataT.38 FAX QoS Available 3.1.11 T.38 OptionT.38 FAX Rate Management Method T.38 FAX QoS-ToS PriorityT.38 FAX QoS-DSCP 3.1.12 DSPT.38 FAX QoS-ToS Type T.38 FAX QoS-HEXNLP Setting 3.1.13 Supplementary ServiceEcho Canceller Ability DSP Digital Gain DownCNIP Receive CLIRCNIP Send SlotYes, No 3.1.13 Supplementary ServiceValue Range Programming Manual for Virtual SIP Trunk Card3.2.1 Card Property Accessing Card Properties3.2 Programming the V-SIPGW16 Card-Card Property Programming Card PropertyManual Alternate DNS Server IP Address DNS Retry Interval TimerManual Preferred DNS Server IP Address Manual DNS Server Port Number3.2.1 Card Property DNS SRV Record Resolve AbilityValue Range Programming Manual for Virtual SIP Trunk Card3.3.1 Main Accessing Shelf Properties3.3 Programming the V-SIPGW16 Card-Shelf Property Programming Shelf PropertyNAT - Keep Alive Packet Type NAT - Voice RTP UDP Port NoNAT - Keep Alive Packet Sending Ability NAT - Keep Alive Packet Sending IntervalSIP Called Party Number Check Ability STUN External Address Detection Retry CounterSTUN Resending Interval Symmetric Response Routing AbilitySIP T2 3.3.2 TimerSIP T1 3.3.2 Timer3.3.2 Timer Programming Manual for Virtual SIP Trunk CardSection Maintenance Programming Manual for Virtual SIP Trunk Card4.1 Configuration Management 4.1.1 Importing/Exporting V-SIPGW16 Provider ProfilesTo transfer trace data to the PC 4.1.2 V-SIPGW16 Protocol TraceTo save trace data to the SD Memory Card 1. From the Utility menu, select V-SIPGW16 Protocol Trace4.1.2 V-SIPGW16 Protocol Trace Programming Manual for Virtual SIP Trunk CardIndex Programming Manual for Virtual SIP Trunk CardPage Programming Manual for Virtual SIP Trunk Card Copyright 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, JapanPSQX5028ZA KK1008TE0