NAT Voice RTP UDP Port No, Stun Ability | Panasonic KX-TDE100

3.3.1 Main

NAT - Voice (RTP) UDP Port No.

Specifies the starting port number of the dynamic ports used for NAT Traversal.

Value Range

2–65000 (even number only)

NAT - Keep Alive Packet Sending Ability

Specifies whether to send Keep Alive packets in order to maintain the NAT binding information. This setting may be compulsory depending on the network conditions.

Value Range

Disable, Enable

NAT - Keep Alive Packet Type

Specifies the type of Keep Alive packets to be sent out.

Value Range

Blank UDP, None

NAT - Keep Alive Packet Sending Interval

Specifies the interval time until the next Keep Alive packet is sent.

Note

It is required to set this interval shorter than the NAT binding time of the router. The default value is appropriate in most cases.

Value Range

1–60 s

NAT - Fixed Global IP Address

Specifies the global IP address of the router with NAT enabled. This setting is compulsory if Fixed IP Addr. is selected in NAT Traversal.

Value Range

1.0.0.0–223.255.255.255

STUN Ability

Specifies whether to open a protocol port of the STUN server to enable STUN feature.

Value Range

Disable, Enable

STUN Client Port Number

Specifies the port number of the PBX used for communications with the STUN server.

Programming Manual for Virtual SIP Trunk Card

43

Image 43

Panasonic KX-TDE100 manual NAT Voice RTP UDP Port No, NAT Keep Alive Packet Sending Ability, NAT Keep Alive Packet Type

Contents

Pure IP-PBX Programming Manual for Virtual SIP Trunk Card Table of Contents Section Overview Requirements for Internet Telephony Service Information about IP Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Required Ports for Each Channel Important Notice for Subscription and InstallationPort Requirements Firewall Requirements Router Requirements Bandwidth RequirementsRequired Bandwidth for Each Channel Items Specification Specifications Specifications Preparations for PC Programming Installing and Starting the Maintenance Console Maintenance Console Operating Instructions Installing the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Under Configuration, click Slot Installing the V-SIPGW16 Card to the PBX Programming the V-SIPGW16 Card Programming the V-SIPGW16 Card-Port Property Accessing Port PropertiesProgramming Port Property Main Account Authentication Password Authentication IDUser Name Register Ability RegisterRegister Sending Interval Registrar Server-IP Address Un-Register Ability when port INS4 NAT Registrar Server-Name Stun Server Port Number OptionStun Server-Name Stun Server-IP Address Proxy-Require Option Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Session Expire Timer Session Refresh Session Timer-Refresh Method Header Type Calling PartyFrom Header-User Part Called Party Type Voice/FAX Packet Sampling Time G.711A IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711µ Maximum Bit Rate Packet Sampling Time G.729AVoice Activity Detection for G.711 FAX Sending Method RTP QoS Ability 9 RTP/RTCPRTP QoS-ToS Priority 10 T.38 FAX Udptl Redundancy count for data FAX Udptl Error Correction RedundancyFAX Max Datagram FAX Udptl Redundancy count for T.30 messages FAX QoS-ToS Priority 11 T.38 OptionFAX Rate Management Method FAX QoS Available FAX QoS-HEX 12 DSPFAX QoS-ToS Type FAX QoS-DSCP Supplementary Service Cnip Receive Cnip Send Value Range Programming Card Property Accessing Card PropertiesProgramming the V-SIPGW16 Card-Card Property Card Property Manual DNS Server Port Number DNS Retry Interval TimerManual Preferred DNS Server IP Address Manual Alternate DNS Server IP Address DNS SRV Record Resolve Ability SIP Client Port Number Accessing Shelf PropertiesProgramming the V-SIPGW16 Card-Shelf Property Programming Shelf Property NAT Keep Alive Packet Sending Interval NAT Voice RTP UDP Port NoNAT Keep Alive Packet Sending Ability NAT Keep Alive Packet Type Symmetric Response Routing Ability Stun External Address Detection Retry CounterStun Resending Interval SIP Called Party Number Check Ability SIP T1 Timer Timer Section Maintenance To export provider profiles Configuration ManagementImporting/Exporting V-SIPGW16 Provider Profiles To import provider profiles To save trace data to the SD Memory Card SIPGW16 Protocol TraceTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0