Panasonic KX-TDE100 Programming the V-SIPGW16 Card-Shelf Property, Main, SIP Client Port Number

3.3.1 Main

3.3Programming the V-SIPGW16 Card—Shelf Property

Common settings for all of the V-SIPGW cards installed in the IPCMPR (for KX-TDE100/KX-TDE200)/ IPCEMPR (for KX-TDE600) Virtual Shelf can be programmed.

Accessing Shelf Properties

1.Under Configuration, click Slot.

2.Move the mouse pointer over the white PBX image at the bottom of the screen for the virtual slots.

3.Click Select Shelf.

4.Move the mouse pointer over the V-SIPGW16card.

5.Click Shelf Property.

Programming Shelf Property

Icon Description

In this section, the following icons show the different parameter type.

Icon

Not marked

Description for Parameter Type

Manual programming is compulsory under certain conditions.

Manual programming is optional.

3.3.1 Main

SIP Client Port Number

Specifies the port number of the PBX used for communications with the SIP server.

Value Range

1–65535

NAT Traversal

Specifies the NAT traversal method.

–STUN: A STUN Server, used alongside the SIP Server, finds out the global IP address of the router with NAT enabled.

–Fixed IP Address: The global IP address of the router with NAT enabled is fixed.

Note

Manual programming is optional except when programming is required depending on the network conditions.

Value Range

Off, Fixed IP Addr., STUN

42

Programming Manual for Virtual SIP Trunk Card