Manuals / Panasonic / Computer Equipment / Computer Accessories

Panasonic KX-TDE100 manual Account, SIP Server Location-Name, SIP Server Location-IP Address

Models: KX-TDE100

1 54

Download 54 pages 18.65 Kb

Page 20

Image 20

3.1.2 Account

Value Range

Max. 20 characters

SIP Server Location—Name

Specifies the domain name of the SIP proxy server.

Note

Specify the domain name of the outbound proxy server, if provided by the SIP provider.

Value Range

Max. 100 characters

SIP Server Location—IP Address

Specifies the IP address of the SIP proxy server. This setting is compulsory when not using the DNS server.

Note

Specify the IP address of the outbound proxy server, if provided by the SIP provider.

Value Range

1.0.0.0–223.255.255.255

SIP Server Port Number

Specifies the port number of the SIP proxy server.

Value Range

1–65535

SIP Service Domain

Specifies the domain name provided by the SIP provider.

Value Range

Max. 100 characters

Subscriber Number

Specifies the number used as the CLIP number.

Value Range

Max. 16 digits (consisting of 0–9, *, and #)

3.1.2 Account

Shelf (KX-TDE600 only)

Indicates the shelf position (reference only).

Programming Manual for Virtual SIP Trunk Card

Page 20

Image 20

Panasonic KX-TDE100 manual Account, SIP Server Location-Name, SIP Server Location-IP Address, SIP Server Port Number

Contents

Pure IP-PBX Programming Manual for Virtual SIP Trunk CardKX-TDE200/KX-TDE600 Model No. KX-TDE100Table of Contents Index4 Maintenance 1 OverviewProgramming Manual for Virtual SIP Trunk Card Section OverviewThis section provides an overview of the V-SIPGW16 card 1.1 Information about IP Telephony Service V-SIPGW16 Connection OutlineWAN Wide Area Network Local Area NetworkDNS Domain Name System NAT Network Address Translation TraversalInternet 1.2 Important Notice for Subscription and Installation 1.2.1 Port Requirements1.2.2 Firewall Requirements Default Port No1.2.3 Bandwidth Requirements Router RequirementsCODEC Packet Sending IntervalItems 1.3 SpecificationsSpecification 1.3 Specifications Programming Manual for Virtual SIP Trunk CardSection 2 Preparations for PC Programming Programming Manual for Virtual SIP Trunk Card2.1 Maintenance Console Operating Instructions 2.1.1 Installing and Starting the Maintenance ConsoleSystem Requirements Hardware RequirementsInstalling the Maintenance Console 7. When country/area data do not match When using a DHCP serverWhen not using a DHCP server a. Select DHCP for the DNS Server Address Method settinga. Select Manual for the DNS Server Address Method setting c. Click Select Shelf 2.2 Installing the V-SIPGW16 Card to the PBX1. a. Under Configuration, click Slot Section 3 Programming the V-SIPGW16 Card Programming Manual for Virtual SIP Trunk CardAccessing Port Properties 3.1 Programming the V-SIPGW16 Card-Port PropertyProgramming Port Property 1. Under Configuration, click Slot3.1.1 Main Shelf KX-TDE600 onlySlot PortSIP Service Domain 3.1.2 AccountSIP Server Location-Name SIP Server Location-IP AddressAuthentication ID Authentication PasswordUser Name Slot3.1.3 Register Register AbilityRegister Sending Interval Shelf KX-TDE600 onlyUn-Register Ability when port INS 3.1.4 NATRegistrar Server-Name Registrar Server-IP Address3.1.5 Option STUN Server-NameSTUN Server-IP Address STUN Server Port NumberSession Refresh Session Timer-Session Timer Ability Session Refresh Session Timer-Session Expire TimerSession Refresh Session Timer-Refresh Method Proxy-Require Option3.1.6 Calling Party Header TypeFrom Header-User Part Shelf KX-TDE600 only3.1.7 Called Party From Header-SIP-URIP-Preferred-Identity Header-User Part P-Preferred-Identity Header-SIP-URI3.1.8 Voice/FAX TypeSlot PortIP Codec Priority-1st, 2nd, 3rd Packet Sampling Time G.711APacket Sampling Time G.711µ SlotPacket Sampling Time G.729A Voice Activity Detection for G.711FAX Sending Method Maximum Bit Rate3.1.9 RTP/RTCP RTP QoS AbilityRTP QoS-ToS Priority Shelf KX-TDE600 only3.1.10 T.38 RTP QoS-ToS TypeRTP QoS-DSCP RTP QoS-HEXT.38 FAX UDPTL Error Correction - Redundancy T.38 FAX Max DatagramT.38 FAX UDPTL Redundancy count for T.30 messages T.38 FAX UDPTL Redundancy count for data3.1.11 T.38 Option T.38 FAX Rate Management MethodT.38 FAX QoS Available T.38 FAX QoS-ToS Priority3.1.12 DSP T.38 FAX QoS-ToS TypeT.38 FAX QoS-DSCP T.38 FAX QoS-HEX3.1.13 Supplementary Service Echo Canceller AbilityNLP Setting DSP Digital Gain DownCLIR CNIP SendCNIP Receive Slot3.1.13 Supplementary Service Value RangeYes, No Programming Manual for Virtual SIP Trunk CardAccessing Card Properties 3.2 Programming the V-SIPGW16 Card-Card Property3.2.1 Card Property Programming Card PropertyDNS Retry Interval Timer Manual Preferred DNS Server IP AddressManual Alternate DNS Server IP Address Manual DNS Server Port NumberDNS SRV Record Resolve Ability Value Range3.2.1 Card Property Programming Manual for Virtual SIP Trunk CardAccessing Shelf Properties 3.3 Programming the V-SIPGW16 Card-Shelf Property3.3.1 Main Programming Shelf PropertyNAT - Voice RTP UDP Port No NAT - Keep Alive Packet Sending AbilityNAT - Keep Alive Packet Type NAT - Keep Alive Packet Sending IntervalSTUN External Address Detection Retry Counter STUN Resending IntervalSIP Called Party Number Check Ability Symmetric Response Routing Ability3.3.2 Timer SIP T1SIP T2 3.3.2 Timer3.3.2 Timer Programming Manual for Virtual SIP Trunk CardSection Maintenance Programming Manual for Virtual SIP Trunk Card4.1 Configuration Management 4.1.1 Importing/Exporting V-SIPGW16 Provider Profiles4.1.2 V-SIPGW16 Protocol Trace To save trace data to the SD Memory CardTo transfer trace data to the PC 1. From the Utility menu, select V-SIPGW16 Protocol Trace4.1.2 V-SIPGW16 Protocol Trace Programming Manual for Virtual SIP Trunk CardIndex Programming Manual for Virtual SIP Trunk CardPage Programming Manual for Virtual SIP Trunk Card Copyright 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, JapanPSQX5028ZA KK1008TE0