Wan | Panasonic KX-TDE100 instruction

1.1 Information about IP Telephony Service

WAN

Internet
STUN		Fixed IP Address
STUN	SIP	SIP
Server	Server	Server

ISP/ITSP

ISP/ITSP

LAN

Router

(NAT enabled)

Switching

Hub

PC

IP-PT

PBX with

V-SIPGW16 Card

Note

•If an ISP/ITSP uses a device such as SBC (Session Border Controller), you may not have to enable the NAT Traversal feature.

•A STUN Server is supplied by an ISP/ITSP, and not included with the PBX.

6

Programming Manual for Virtual SIP Trunk Card

Image 6

Panasonic KX-TDE100 manual Wan

Contents

Programming Manual for Virtual SIP Trunk Card Pure IP-PBX Table of Contents Section Overview Information about IP Telephony Service Requirements for Internet Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Firewall Requirements Important Notice for Subscription and InstallationPort Requirements Required Ports for Each Channel Bandwidth Requirements Router RequirementsRequired Bandwidth for Each Channel Specifications Items Specification Specifications Preparations for PC Programming Maintenance Console Operating Instructions Installing and Starting the Maintenance Console Installing the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Installing the V-SIPGW16 Card to the PBX Under Configuration, click Slot Programming the V-SIPGW16 Card Accessing Port Properties Programming the V-SIPGW16 Card-Port PropertyProgramming Port Property Main Account Authentication ID Authentication PasswordUser Name Register Register AbilityRegister Sending Interval Registrar Server-Name Un-Register Ability when port INS4 NAT Registrar Server-IP Address Stun Server-IP Address OptionStun Server-Name Stun Server Port Number Session Refresh Session Timer-Refresh Method Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Session Expire Timer Proxy-Require Option Calling Party Header TypeFrom Header-User Part Called Party Voice/FAX Type IP Codec Priority-1st, 2nd, 3rd Packet Sampling Time G.711APacket Sampling Time G.711µ FAX Sending Method Packet Sampling Time G.729AVoice Activity Detection for G.711 Maximum Bit Rate 9 RTP/RTCP RTP QoS AbilityRTP QoS-ToS Priority 10 T.38 FAX Udptl Redundancy count for T.30 messages FAX Udptl Error Correction RedundancyFAX Max Datagram FAX Udptl Redundancy count for data FAX QoS Available 11 T.38 OptionFAX Rate Management Method FAX QoS-ToS Priority FAX QoS-DSCP 12 DSPFAX QoS-ToS Type FAX QoS-HEX Supplementary Service Cnip Send Cnip Receive Value Range Card Property Accessing Card PropertiesProgramming the V-SIPGW16 Card-Card Property Programming Card Property Manual Alternate DNS Server IP Address DNS Retry Interval TimerManual Preferred DNS Server IP Address Manual DNS Server Port Number DNS SRV Record Resolve Ability Programming Shelf Property Accessing Shelf PropertiesProgramming the V-SIPGW16 Card-Shelf Property SIP Client Port Number NAT Keep Alive Packet Type NAT Voice RTP UDP Port NoNAT Keep Alive Packet Sending Ability NAT Keep Alive Packet Sending Interval SIP Called Party Number Check Ability Stun External Address Detection Retry CounterStun Resending Interval Symmetric Response Routing Ability Timer SIP T1 Timer Section Maintenance To import provider profiles Configuration ManagementImporting/Exporting V-SIPGW16 Provider Profiles To export provider profiles SIPGW16 Protocol Trace To save trace data to the SD Memory CardTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0