Manuals / Panasonic / Computer Equipment / Computer Accessories

Panasonic KX-TDE100 User Name, Authentication ID, Authentication Password, Slot, Port, Connection

Models: KX-TDE100

1 54

Download 54 pages 18.65 Kb

Page 21

Image 21

3.1.2 Account

Value Range

Shelf type

Slot

Indicates the slot position (reference only).

Value Range

Slot number

Port

Indicates the port number (reference only).

Value Range

Port number

Connection

Indicates the port status.

This column offers two ways to open the screen to select the port command:

•Click the desired cell in the column.

•Select the desired cell in the column, and then click Command.

Value Range

INS: The port is in service.

OUS: The port is out of service.

Fault: The port is not communicating with the network.

User Name

Specifies the user name (SIP Account) provided by the SIP provider.

Value Range

Max. 64 characters

Authentication ID

Specifies the authentication ID required for registration with the SIP server.

Value Range

Max. 64 characters

Authentication Password

Specifies the authentication password used for registration with the SIP provider.

Value Range

Max. 32 characters

Programming Manual for Virtual SIP Trunk Card

Page 21

Image 21

Panasonic KX-TDE100 manual User Name, Authentication ID, Authentication Password, Slot, Port, Connection

Contents

Programming Manual for Virtual SIP Trunk Card Pure IP-PBXKX-TDE200/KX-TDE600 Model No. KX-TDE100Index Table of Contents4 Maintenance 1 OverviewSection Overview This section provides an overview of the V-SIPGW16 cardProgramming Manual for Virtual SIP Trunk Card V-SIPGW16 Connection Outline 1.1 Information about IP Telephony ServiceWAN Wide Area Network Local Area NetworkNAT Network Address Translation Traversal DNS Domain Name SystemInternet 1.2.1 Port Requirements 1.2 Important Notice for Subscription and Installation1.2.2 Firewall Requirements Default Port NoRouter Requirements 1.2.3 Bandwidth RequirementsCODEC Packet Sending Interval1.3 Specifications SpecificationItems Programming Manual for Virtual SIP Trunk Card 1.3 SpecificationsProgramming Manual for Virtual SIP Trunk Card Section 2 Preparations for PC Programming2.1.1 Installing and Starting the Maintenance Console 2.1 Maintenance Console Operating InstructionsSystem Requirements Hardware RequirementsInstalling the Maintenance Console When using a DHCP server 7. When country/area data do not matchWhen not using a DHCP server a. Select DHCP for the DNS Server Address Method settinga. Select Manual for the DNS Server Address Method setting 2.2 Installing the V-SIPGW16 Card to the PBX 1. a. Under Configuration, click Slotc. Click Select Shelf Programming Manual for Virtual SIP Trunk Card Section 3 Programming the V-SIPGW16 Card3.1 Programming the V-SIPGW16 Card-Port Property Accessing Port PropertiesProgramming Port Property 1. Under Configuration, click SlotShelf KX-TDE600 only 3.1.1 MainSlot Port3.1.2 Account SIP Service DomainSIP Server Location-Name SIP Server Location-IP AddressAuthentication Password Authentication IDUser Name SlotRegister Ability 3.1.3 RegisterRegister Sending Interval Shelf KX-TDE600 only3.1.4 NAT Un-Register Ability when port INSRegistrar Server-Name Registrar Server-IP AddressSTUN Server-Name 3.1.5 OptionSTUN Server-IP Address STUN Server Port NumberSession Refresh Session Timer-Session Expire Timer Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Refresh Method Proxy-Require OptionHeader Type 3.1.6 Calling PartyFrom Header-User Part Shelf KX-TDE600 onlyFrom Header-SIP-URI 3.1.7 Called PartyP-Preferred-Identity Header-User Part P-Preferred-Identity Header-SIP-URIType 3.1.8 Voice/FAXSlot PortPacket Sampling Time G.711A IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711µ SlotVoice Activity Detection for G.711 Packet Sampling Time G.729AFAX Sending Method Maximum Bit RateRTP QoS Ability 3.1.9 RTP/RTCPRTP QoS-ToS Priority Shelf KX-TDE600 onlyRTP QoS-ToS Type 3.1.10 T.38RTP QoS-DSCP RTP QoS-HEXT.38 FAX Max Datagram T.38 FAX UDPTL Error Correction - RedundancyT.38 FAX UDPTL Redundancy count for T.30 messages T.38 FAX UDPTL Redundancy count for dataT.38 FAX Rate Management Method 3.1.11 T.38 OptionT.38 FAX QoS Available T.38 FAX QoS-ToS PriorityT.38 FAX QoS-ToS Type 3.1.12 DSPT.38 FAX QoS-DSCP T.38 FAX QoS-HEXEcho Canceller Ability 3.1.13 Supplementary ServiceNLP Setting DSP Digital Gain DownCNIP Send CLIRCNIP Receive SlotValue Range 3.1.13 Supplementary ServiceYes, No Programming Manual for Virtual SIP Trunk Card3.2 Programming the V-SIPGW16 Card-Card Property Accessing Card Properties3.2.1 Card Property Programming Card PropertyManual Preferred DNS Server IP Address DNS Retry Interval TimerManual Alternate DNS Server IP Address Manual DNS Server Port NumberValue Range DNS SRV Record Resolve Ability3.2.1 Card Property Programming Manual for Virtual SIP Trunk Card3.3 Programming the V-SIPGW16 Card-Shelf Property Accessing Shelf Properties3.3.1 Main Programming Shelf PropertyNAT - Keep Alive Packet Sending Ability NAT - Voice RTP UDP Port NoNAT - Keep Alive Packet Type NAT - Keep Alive Packet Sending IntervalSTUN Resending Interval STUN External Address Detection Retry CounterSIP Called Party Number Check Ability Symmetric Response Routing AbilitySIP T1 3.3.2 TimerSIP T2 3.3.2 TimerProgramming Manual for Virtual SIP Trunk Card 3.3.2 TimerProgramming Manual for Virtual SIP Trunk Card Section Maintenance4.1.1 Importing/Exporting V-SIPGW16 Provider Profiles 4.1 Configuration ManagementTo save trace data to the SD Memory Card 4.1.2 V-SIPGW16 Protocol TraceTo transfer trace data to the PC 1. From the Utility menu, select V-SIPGW16 Protocol TraceProgramming Manual for Virtual SIP Trunk Card 4.1.2 V-SIPGW16 Protocol TraceProgramming Manual for Virtual SIP Trunk Card IndexPage Programming Manual for Virtual SIP Trunk Card 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan PSQX5028ZA KK1008TE0Copyright