3.2.1 Card Property

3.2Programming the V-SIPGW16 Card—Card Property

3.2.1 Card Property

The properties of the V-SIPGW card can be specified. To programme the parameters, click Common Settings, and set the desired value.

Accessing Card Properties

1.Under Configuration, click Slot.

2.Move the mouse pointer over the white PBX image at the bottom of the screen for the virtual slots.

3.Click Select Shelf.

4.Move the mouse pointer over the V-SIPGW16card.

5.Click Card Property.

Programming Card Property

Icon Description

In this section, the following icons show the different parameter type.

Icon

Not marked

Description for Parameter Type

Manual programming is compulsory under certain conditions.

Manual programming is optional.

DNS Server IP Address Method

Specifies the method of IP address assignment for a DNS server. When selecting DHCP, the DNS server IP address can be assigned automatically by a DHCP server. When selecting Manual, the DNS server IP address must be assigned manually.

Value Range

DHCP, Manual

DHCP Preferred DNS Server IP Address

Indicates the IP address of the preferred DNS server assigned automatically by the DHCP server (reference only).

Value Range

1.0.0.0–223.255.255.255

DHCP Alternate DNS Server IP Address

Indicates the IP address of the alternate DNS server assigned automatically by the DHCP server (reference only).

Programming Manual for Virtual SIP Trunk Card

39

Page 39
Image 39
Panasonic KX-TDE100 Programming the V-SIPGW16 Card-Card Property, Accessing Card Properties, Programming Card Property