Manuals / Panasonic / Computer Equipment / Computer Accessories

Panasonic KX-TDE100 Voice/FAX, Type, Slot, Port, Connection, Number Format, Shelf KX-TDE600 only

Models: KX-TDE100

1 54

Download 54 pages 18.65 Kb

Page 28

Image 28

3.1.8 Voice/FAX

Value Range

Shelf type

Slot

Indicates the slot position (reference only).

Value Range

Slot number

Port

Indicates the port number (reference only).

Value Range

Port number

Connection

Indicates the port status.

This column offers two ways to open the screen to select the port command:

•Click the desired cell in the column.

•Select the desired cell in the column, and then click Command.

Value Range

INS: The port is in service.

OUS: The port is out of service.

Fault: The port is not communicating with the network.

Number Format

Specifies the format of an incoming call number.

Value Range

International, +International, National

Type

Specifies the header of the incoming SIP message in which the dialled number is stored.

Value Range

Request-URI, To header

3.1.8 Voice/FAX

Shelf (KX-TDE600 only)

Indicates the shelf position (reference only).

Programming Manual for Virtual SIP Trunk Card

Page 28

Image 28

Panasonic KX-TDE100 manual Voice/FAX, Type, Slot, Port, Connection, Number Format, Shelf KX-TDE600 only

Contents

Pure IP-PBX Programming Manual for Virtual SIP Trunk CardKX-TDE200/KX-TDE600 Model No. KX-TDE100Table of Contents Index4 Maintenance 1 OverviewThis section provides an overview of the V-SIPGW16 card Section OverviewProgramming Manual for Virtual SIP Trunk Card 1.1 Information about IP Telephony Service V-SIPGW16 Connection OutlineWAN Wide Area Network Local Area NetworkDNS Domain Name System NAT Network Address Translation TraversalInternet 1.2 Important Notice for Subscription and Installation 1.2.1 Port Requirements1.2.2 Firewall Requirements Default Port No1.2.3 Bandwidth Requirements Router RequirementsCODEC Packet Sending IntervalSpecification 1.3 SpecificationsItems 1.3 Specifications Programming Manual for Virtual SIP Trunk CardSection 2 Preparations for PC Programming Programming Manual for Virtual SIP Trunk Card2.1 Maintenance Console Operating Instructions 2.1.1 Installing and Starting the Maintenance ConsoleSystem Requirements Hardware RequirementsInstalling the Maintenance Console 7. When country/area data do not match When using a DHCP serverWhen not using a DHCP server a. Select DHCP for the DNS Server Address Method settinga. Select Manual for the DNS Server Address Method setting 1. a. Under Configuration, click Slot 2.2 Installing the V-SIPGW16 Card to the PBXc. Click Select Shelf Section 3 Programming the V-SIPGW16 Card Programming Manual for Virtual SIP Trunk CardAccessing Port Properties 3.1 Programming the V-SIPGW16 Card-Port PropertyProgramming Port Property 1. Under Configuration, click Slot3.1.1 Main Shelf KX-TDE600 onlySlot PortSIP Service Domain 3.1.2 AccountSIP Server Location-Name SIP Server Location-IP AddressAuthentication ID Authentication PasswordUser Name Slot3.1.3 Register Register AbilityRegister Sending Interval Shelf KX-TDE600 onlyUn-Register Ability when port INS 3.1.4 NATRegistrar Server-Name Registrar Server-IP Address3.1.5 Option STUN Server-NameSTUN Server-IP Address STUN Server Port NumberSession Refresh Session Timer-Session Timer Ability Session Refresh Session Timer-Session Expire TimerSession Refresh Session Timer-Refresh Method Proxy-Require Option3.1.6 Calling Party Header TypeFrom Header-User Part Shelf KX-TDE600 only3.1.7 Called Party From Header-SIP-URIP-Preferred-Identity Header-User Part P-Preferred-Identity Header-SIP-URI3.1.8 Voice/FAX TypeSlot PortIP Codec Priority-1st, 2nd, 3rd Packet Sampling Time G.711APacket Sampling Time G.711µ SlotPacket Sampling Time G.729A Voice Activity Detection for G.711FAX Sending Method Maximum Bit Rate3.1.9 RTP/RTCP RTP QoS AbilityRTP QoS-ToS Priority Shelf KX-TDE600 only3.1.10 T.38 RTP QoS-ToS TypeRTP QoS-DSCP RTP QoS-HEXT.38 FAX UDPTL Error Correction - Redundancy T.38 FAX Max DatagramT.38 FAX UDPTL Redundancy count for T.30 messages T.38 FAX UDPTL Redundancy count for data3.1.11 T.38 Option T.38 FAX Rate Management MethodT.38 FAX QoS Available T.38 FAX QoS-ToS Priority3.1.12 DSP T.38 FAX QoS-ToS TypeT.38 FAX QoS-DSCP T.38 FAX QoS-HEX3.1.13 Supplementary Service Echo Canceller AbilityNLP Setting DSP Digital Gain DownCLIR CNIP SendCNIP Receive Slot3.1.13 Supplementary Service Value RangeYes, No Programming Manual for Virtual SIP Trunk CardAccessing Card Properties 3.2 Programming the V-SIPGW16 Card-Card Property3.2.1 Card Property Programming Card PropertyDNS Retry Interval Timer Manual Preferred DNS Server IP AddressManual Alternate DNS Server IP Address Manual DNS Server Port NumberDNS SRV Record Resolve Ability Value Range3.2.1 Card Property Programming Manual for Virtual SIP Trunk CardAccessing Shelf Properties 3.3 Programming the V-SIPGW16 Card-Shelf Property3.3.1 Main Programming Shelf PropertyNAT - Voice RTP UDP Port No NAT - Keep Alive Packet Sending AbilityNAT - Keep Alive Packet Type NAT - Keep Alive Packet Sending IntervalSTUN External Address Detection Retry Counter STUN Resending IntervalSIP Called Party Number Check Ability Symmetric Response Routing Ability3.3.2 Timer SIP T1SIP T2 3.3.2 Timer3.3.2 Timer Programming Manual for Virtual SIP Trunk CardSection Maintenance Programming Manual for Virtual SIP Trunk Card4.1 Configuration Management 4.1.1 Importing/Exporting V-SIPGW16 Provider Profiles4.1.2 V-SIPGW16 Protocol Trace To save trace data to the SD Memory CardTo transfer trace data to the PC 1. From the Utility menu, select V-SIPGW16 Protocol Trace4.1.2 V-SIPGW16 Protocol Trace Programming Manual for Virtual SIP Trunk CardIndex Programming Manual for Virtual SIP Trunk CardPage Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, JapanCopyright