Packet Sampling Time G.729A, Maximum Bit Rate | Panasonic KX-TDE100

3.1.8 Voice/FAX

Packet Sampling Time (G.729A)

Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller this number, the higher the quality of the transmitted sound.

Value Range

10 ms, 20 ms, 30 ms, 40 ms, 50 ms, 60 ms

Voice Activity Detection for G.711

Enables the use of the Voice Activity Detection feature for the G.711 CODEC. This feature conserves bandwidth by detecting silent periods during a call and suppressing the packets of silence from being sent to the network.

Value Range

Disable, Enable

FAX Sending Method

Specifies the method of transporting the fax signal.

Value Range

G.711 Inband, T.38

Maximum Bit Rate

Specifies the maximum bit rate of the fax signal.

Value Range

No Speed Limit, 2400 bps, 4800 bps, 7200 bps, 9600 bps, 12000 bps, 14400 bps

FAX Detection Ability

Enables the use of the FAX Detection Ability feature. This feature enables end-to-end fax signal relay when the other party prefers a CODEC other than G.711. This feature functions only if the other party supports G. 711.

Value Range

Disable, Enable

DTMF

Specifies the method to transport DTMF tones.

Value Range

Inband, Outband (RFC2833)

Payload Type

Specifies the payload type of RFC2833 for DTMF tones.

30

Programming Manual for Virtual SIP Trunk Card

Image 30

Panasonic KX-TDE100 Packet Sampling Time G.729A, Voice Activity Detection for G.711, FAX Sending Method, Maximum Bit Rate

Contents

Programming Manual for Virtual SIP Trunk Card Pure IP-PBX Table of Contents Section Overview Information about IP Telephony Service Requirements for Internet Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Firewall Requirements Important Notice for Subscription and InstallationPort Requirements Required Ports for Each Channel Bandwidth Requirements Router RequirementsRequired Bandwidth for Each Channel Specifications Items Specification Specifications Preparations for PC Programming Maintenance Console Operating Instructions Installing and Starting the Maintenance Console Installing the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Installing the V-SIPGW16 Card to the PBX Under Configuration, click Slot Programming the V-SIPGW16 Card Accessing Port Properties Programming the V-SIPGW16 Card-Port PropertyProgramming Port Property Main Account Authentication ID Authentication PasswordUser Name Register Register AbilityRegister Sending Interval Registrar Server-Name Un-Register Ability when port INS4 NAT Registrar Server-IP Address Stun Server-IP Address OptionStun Server-Name Stun Server Port Number Session Refresh Session Timer-Refresh Method Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Session Expire Timer Proxy-Require Option Calling Party Header TypeFrom Header-User Part Called Party Voice/FAX Type IP Codec Priority-1st, 2nd, 3rd Packet Sampling Time G.711APacket Sampling Time G.711µ FAX Sending Method Packet Sampling Time G.729AVoice Activity Detection for G.711 Maximum Bit Rate 9 RTP/RTCP RTP QoS AbilityRTP QoS-ToS Priority 10 T.38 FAX Udptl Redundancy count for T.30 messages FAX Udptl Error Correction RedundancyFAX Max Datagram FAX Udptl Redundancy count for data FAX QoS Available 11 T.38 OptionFAX Rate Management Method FAX QoS-ToS Priority FAX QoS-DSCP 12 DSPFAX QoS-ToS Type FAX QoS-HEX Supplementary Service Cnip Send Cnip Receive Value Range Card Property Accessing Card PropertiesProgramming the V-SIPGW16 Card-Card Property Programming Card Property Manual Alternate DNS Server IP Address DNS Retry Interval TimerManual Preferred DNS Server IP Address Manual DNS Server Port Number DNS SRV Record Resolve Ability Programming Shelf Property Accessing Shelf PropertiesProgramming the V-SIPGW16 Card-Shelf Property SIP Client Port Number NAT Keep Alive Packet Type NAT Voice RTP UDP Port NoNAT Keep Alive Packet Sending Ability NAT Keep Alive Packet Sending Interval SIP Called Party Number Check Ability Stun External Address Detection Retry CounterStun Resending Interval Symmetric Response Routing Ability Timer SIP T1 Timer Section Maintenance To import provider profiles Configuration ManagementImporting/Exporting V-SIPGW16 Provider Profiles To export provider profiles SIPGW16 Protocol Trace To save trace data to the SD Memory CardTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0