Manuals / Panasonic / Computer Equipment / Computer Accessories

Panasonic KX-TDE100 3.1.9 RTP/RTCP, RTP QoS Ability, RTP QoS-ToS Priority, Shelf KX-TDE600 only

Models: KX-TDE100

1 54

Download 54 pages 18.65 Kb

Page 31

Image 31

3.1.9 RTP/RTCP

Note

Manual programming is required if DTMF is set to Outband (RFC2833).

Value Range

96–127

3.1.9 RTP/RTCP

Shelf (KX-TDE600 only)

Indicates the shelf position (reference only).

Value Range

Shelf type

Slot

Indicates the slot position (reference only).

Value Range

Slot number

Port

Indicates the port number (reference only).

Value Range

Port number

Connection

Indicates the port status.

This column offers two ways to open the screen to select the port command:

•Click the desired cell in the column.

•Select the desired cell in the column, and then click Command.

Value Range

INS: The port is in service.

OUS: The port is out of service.

Fault: The port is not communicating with the network.

RTP QoS Ability

Specifies the type of value to be stored in the ToS field in the IP header.

Value Range

ToS, DSCP, HEX

RTP QoS-ToS Priority

Specifies the priority level in the ToS field.

Programming Manual for Virtual SIP Trunk Card

Page 31

Image 31

Panasonic KX-TDE100 3.1.9 RTP/RTCP, RTP QoS Ability, RTP QoS-ToS Priority, Shelf KX-TDE600 only, Slot, Port, Connection

Contents

Model No. KX-TDE100 Pure IP-PBXProgramming Manual for Virtual SIP Trunk Card KX-TDE200/KX-TDE6001 Overview Table of ContentsIndex 4 MaintenanceThis section provides an overview of the V-SIPGW16 card Section OverviewProgramming Manual for Virtual SIP Trunk Card Local Area Network 1.1 Information about IP Telephony ServiceV-SIPGW16 Connection Outline WAN Wide Area NetworkNAT Network Address Translation Traversal DNS Domain Name SystemInternet Default Port No 1.2 Important Notice for Subscription and Installation1.2.1 Port Requirements 1.2.2 Firewall RequirementsPacket Sending Interval 1.2.3 Bandwidth RequirementsRouter Requirements CODECSpecification 1.3 SpecificationsItems Programming Manual for Virtual SIP Trunk Card 1.3 SpecificationsProgramming Manual for Virtual SIP Trunk Card Section 2 Preparations for PC ProgrammingHardware Requirements 2.1 Maintenance Console Operating Instructions2.1.1 Installing and Starting the Maintenance Console System RequirementsInstalling the Maintenance Console a. Select DHCP for the DNS Server Address Method setting 7. When country/area data do not matchWhen using a DHCP server When not using a DHCP servera. Select Manual for the DNS Server Address Method setting 1. a. Under Configuration, click Slot 2.2 Installing the V-SIPGW16 Card to the PBXc. Click Select Shelf Programming Manual for Virtual SIP Trunk Card Section 3 Programming the V-SIPGW16 Card1. Under Configuration, click Slot Accessing Port Properties3.1 Programming the V-SIPGW16 Card-Port Property Programming Port PropertyPort 3.1.1 MainShelf KX-TDE600 only SlotSIP Server Location-IP Address SIP Service Domain3.1.2 Account SIP Server Location-NameSlot Authentication IDAuthentication Password User NameShelf KX-TDE600 only 3.1.3 RegisterRegister Ability Register Sending IntervalRegistrar Server-IP Address Un-Register Ability when port INS3.1.4 NAT Registrar Server-NameSTUN Server Port Number 3.1.5 OptionSTUN Server-Name STUN Server-IP AddressProxy-Require Option Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Session Expire Timer Session Refresh Session Timer-Refresh MethodShelf KX-TDE600 only 3.1.6 Calling PartyHeader Type From Header-User PartP-Preferred-Identity Header-SIP-URI 3.1.7 Called PartyFrom Header-SIP-URI P-Preferred-Identity Header-User PartPort 3.1.8 Voice/FAXType SlotSlot IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711A Packet Sampling Time G.711µMaximum Bit Rate Packet Sampling Time G.729AVoice Activity Detection for G.711 FAX Sending MethodShelf KX-TDE600 only 3.1.9 RTP/RTCPRTP QoS Ability RTP QoS-ToS PriorityRTP QoS-HEX 3.1.10 T.38RTP QoS-ToS Type RTP QoS-DSCPT.38 FAX UDPTL Redundancy count for data T.38 FAX UDPTL Error Correction - RedundancyT.38 FAX Max Datagram T.38 FAX UDPTL Redundancy count for T.30 messagesT.38 FAX QoS-ToS Priority 3.1.11 T.38 OptionT.38 FAX Rate Management Method T.38 FAX QoS AvailableT.38 FAX QoS-HEX 3.1.12 DSPT.38 FAX QoS-ToS Type T.38 FAX QoS-DSCPDSP Digital Gain Down 3.1.13 Supplementary ServiceEcho Canceller Ability NLP SettingSlot CLIRCNIP Send CNIP ReceiveProgramming Manual for Virtual SIP Trunk Card 3.1.13 Supplementary ServiceValue Range Yes, NoProgramming Card Property Accessing Card Properties3.2 Programming the V-SIPGW16 Card-Card Property 3.2.1 Card PropertyManual DNS Server Port Number DNS Retry Interval TimerManual Preferred DNS Server IP Address Manual Alternate DNS Server IP AddressProgramming Manual for Virtual SIP Trunk Card DNS SRV Record Resolve AbilityValue Range 3.2.1 Card PropertyProgramming Shelf Property Accessing Shelf Properties3.3 Programming the V-SIPGW16 Card-Shelf Property 3.3.1 MainNAT - Keep Alive Packet Sending Interval NAT - Voice RTP UDP Port NoNAT - Keep Alive Packet Sending Ability NAT - Keep Alive Packet TypeSymmetric Response Routing Ability STUN External Address Detection Retry CounterSTUN Resending Interval SIP Called Party Number Check Ability3.3.2 Timer 3.3.2 TimerSIP T1 SIP T2Programming Manual for Virtual SIP Trunk Card 3.3.2 TimerProgramming Manual for Virtual SIP Trunk Card Section Maintenance4.1.1 Importing/Exporting V-SIPGW16 Provider Profiles 4.1 Configuration Management1. From the Utility menu, select V-SIPGW16 Protocol Trace 4.1.2 V-SIPGW16 Protocol TraceTo save trace data to the SD Memory Card To transfer trace data to the PCProgramming Manual for Virtual SIP Trunk Card 4.1.2 V-SIPGW16 Protocol TraceProgramming Manual for Virtual SIP Trunk Card IndexPage Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0 1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, JapanCopyright