10 T.38 | Panasonic KX-TDE100 specification

3.1.10 T.38

Value Range

0–7

RTP QoS-ToS Type

Specifies the ToS type in the ToS field.

Value Range

Normal, Monetary Cost, Reliability, Throughput, Delay

RTP QoS-DSCP

Specifies the value in the ToS field by a DSCP for DiffServ.

Value Range

0–63

RTP QoS-HEX

Specifies the value in the ToS field by a hexadecimal number.

Value Range

00–FF

RTCP Packet Sending Ability

Specifies whether to enable each port to send RTCP packets.

Value Range

Disable, Enable

RTCP Packet Interval

Specifies the interval time until the next RTCP packet is sent.

Value Range

5–60 s

3.1.10 T.38

Shelf (KX-TDE600 only)

Indicates the shelf position (reference only).

Value Range

Shelf type

Slot

Indicates the slot position (reference only).

32

Programming Manual for Virtual SIP Trunk Card

Image 32

Panasonic KX-TDE100 manual 10 T.38

Contents

Programming Manual for Virtual SIP Trunk Card Pure IP-PBX Table of Contents Section Overview SIPGW16 Connection Outline Information about IP Telephony ServiceRequirements for Internet Telephony Service Information about IP Telephony Service WAN Important Notice for Subscription and Installation Port RequirementsFirewall Requirements Required Ports for Each Channel Required Bandwidth for Each Channel Bandwidth RequirementsRouter Requirements Specifications Items Specification Specifications Preparations for PC Programming Maintenance Console Operating Instructions Installing and Starting the Maintenance Console Installing the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Installing the V-SIPGW16 Card to the PBX Under Configuration, click Slot Programming the V-SIPGW16 Card Programming Port Property Accessing Port PropertiesProgramming the V-SIPGW16 Card-Port Property Main Account User Name Authentication IDAuthentication Password Register Sending Interval RegisterRegister Ability Un-Register Ability when port INS 4 NATRegistrar Server-Name Registrar Server-IP Address Option Stun Server-NameStun Server-IP Address Stun Server Port Number Session Refresh Session Timer-Session Timer Ability Session Refresh Session Timer-Session Expire TimerSession Refresh Session Timer-Refresh Method Proxy-Require Option From Header-User Part Calling PartyHeader Type Called Party Voice/FAX Type Packet Sampling Time G.711µ IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711A Packet Sampling Time G.729A Voice Activity Detection for G.711FAX Sending Method Maximum Bit Rate RTP QoS-ToS Priority 9 RTP/RTCPRTP QoS Ability 10 T.38 FAX Udptl Error Correction Redundancy FAX Max DatagramFAX Udptl Redundancy count for T.30 messages FAX Udptl Redundancy count for data 11 T.38 Option FAX Rate Management MethodFAX QoS Available FAX QoS-ToS Priority 12 DSP FAX QoS-ToS TypeFAX QoS-DSCP FAX QoS-HEX Supplementary Service Cnip Send Cnip Receive Value Range Accessing Card Properties Programming the V-SIPGW16 Card-Card PropertyCard Property Programming Card Property DNS Retry Interval Timer Manual Preferred DNS Server IP AddressManual Alternate DNS Server IP Address Manual DNS Server Port Number DNS SRV Record Resolve Ability Accessing Shelf Properties Programming the V-SIPGW16 Card-Shelf PropertyProgramming Shelf Property SIP Client Port Number NAT Voice RTP UDP Port No NAT Keep Alive Packet Sending AbilityNAT Keep Alive Packet Type NAT Keep Alive Packet Sending Interval Stun External Address Detection Retry Counter Stun Resending IntervalSIP Called Party Number Check Ability Symmetric Response Routing Ability Timer SIP T1 Timer Section Maintenance Configuration Management Importing/Exporting V-SIPGW16 Provider ProfilesTo import provider profiles To export provider profiles To transfer trace data to the PC SIPGW16 Protocol TraceTo save trace data to the SD Memory Card SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0