Pure IP-PBX | Panasonic KX-TDE100 instruction

Programming Manual for Virtual SIP Trunk Card

Pure IP-PBX

Model No. KX-TDE100

KX-TDE200/KX-TDE600

Thank you for purchasing a Panasonic Pure IP-PBX.

Please read this manual carefully before using this product and save this manual for future use.

KX-TDE100/KX-TDE200: PMMPR Software File Version 2.0000 or later

KX-TDE600: PGMPR Software File Version 2.0000 or later

In this manual, the suffix of each model number (e.g., KX-TDE100NE) is omitted unless necessary.

Image 1

Panasonic KX-TDE100 manual Programming Manual for Virtual SIP Trunk Card, Pure IP-PBX

Contents

Pure IP-PBX Programming Manual for Virtual SIP Trunk Card Table of Contents Section Overview Requirements for Internet Telephony Service Information about IP Telephony ServiceSIPGW16 Connection Outline Information about IP Telephony Service WAN Port Requirements Important Notice for Subscription and InstallationFirewall Requirements Required Ports for Each Channel Router Requirements Bandwidth RequirementsRequired Bandwidth for Each Channel Items Specification Specifications Specifications Preparations for PC Programming Installing and Starting the Maintenance Console Maintenance Console Operating Instructions Installing the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Under Configuration, click Slot Installing the V-SIPGW16 Card to the PBX Programming the V-SIPGW16 Card Programming the V-SIPGW16 Card-Port Property Accessing Port PropertiesProgramming Port Property Main Account Authentication Password Authentication IDUser Name Register Ability RegisterRegister Sending Interval 4 NAT Un-Register Ability when port INSRegistrar Server-Name Registrar Server-IP Address Stun Server-Name OptionStun Server-IP Address Stun Server Port Number Session Refresh Session Timer-Session Expire Timer Session Refresh Session Timer-Session Timer AbilitySession Refresh Session Timer-Refresh Method Proxy-Require Option Header Type Calling PartyFrom Header-User Part Called Party Type Voice/FAX Packet Sampling Time G.711A IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711µ Voice Activity Detection for G.711 Packet Sampling Time G.729AFAX Sending Method Maximum Bit Rate RTP QoS Ability 9 RTP/RTCPRTP QoS-ToS Priority 10 T.38 FAX Max Datagram FAX Udptl Error Correction RedundancyFAX Udptl Redundancy count for T.30 messages FAX Udptl Redundancy count for data FAX Rate Management Method 11 T.38 OptionFAX QoS Available FAX QoS-ToS Priority FAX QoS-ToS Type 12 DSPFAX QoS-DSCP FAX QoS-HEX Supplementary Service Cnip Receive Cnip Send Value Range Programming the V-SIPGW16 Card-Card Property Accessing Card PropertiesCard Property Programming Card Property Manual Preferred DNS Server IP Address DNS Retry Interval TimerManual Alternate DNS Server IP Address Manual DNS Server Port Number DNS SRV Record Resolve Ability Programming the V-SIPGW16 Card-Shelf Property Accessing Shelf PropertiesProgramming Shelf Property SIP Client Port Number NAT Keep Alive Packet Sending Ability NAT Voice RTP UDP Port NoNAT Keep Alive Packet Type NAT Keep Alive Packet Sending Interval Stun Resending Interval Stun External Address Detection Retry CounterSIP Called Party Number Check Ability Symmetric Response Routing Ability SIP T1 Timer Timer Section Maintenance Importing/Exporting V-SIPGW16 Provider Profiles Configuration ManagementTo import provider profiles To export provider profiles To save trace data to the SD Memory Card SIPGW16 Protocol TraceTo transfer trace data to the PC SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0