Stun External Address Detection Retry Counter | Panasonic KX-TDE100

3.3.1 Main

Value Range

1–65535

STUN External Address Detection Retry Counter

Specifies the number of times that a query is retried when no response is received from the STUN server.

Value Range

0–8

STUN Resending Interval

Specifies the length of time until a query is retried when no response is received from the STUN server.

Value Range

0–1600 ms

SIP Called Party Number Check Ability

Specifies whether to receive a SIP trunk call when receiving the INVITE message with an incorrect target SIP-URI. The setting specified here is also applied when the request header is blank or contains characters that can not be modified to a receivable number.

Value Range

Disable (High->Low), Disable (Low->High), Enable

Symmetric Response Routing Ability

Enables this feature to request that the SIP server sends the response back to the source IP address and port from which the request originated.

Value Range

Disable, Enable

100rel Ability

Specifies whether to add the option tag 100rel to the header field of the INVITE message.

Value Range

Disable: This feature is not activated.

Enable (Active): Activates this feature only if the other device supports the feature.

Enable (Passive): Activates this feature only when requested by the other device.

Ringback Tone to Outside Caller

Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.

Value Range

Disable, Enable

44

Programming Manual for Virtual SIP Trunk Card

Image 44

Panasonic KX-TDE100 manual Stun External Address Detection Retry Counter, Stun Resending Interval, 100rel Ability

Contents

Programming Manual for Virtual SIP Trunk Card Pure IP-PBX Table of Contents Section Overview SIPGW16 Connection Outline Information about IP Telephony ServiceRequirements for Internet Telephony Service Information about IP Telephony Service WAN Important Notice for Subscription and Installation Port RequirementsFirewall Requirements Required Ports for Each Channel Required Bandwidth for Each Channel Bandwidth RequirementsRouter Requirements Specifications Items Specification Specifications Preparations for PC Programming Maintenance Console Operating Instructions Installing and Starting the Maintenance Console Installing the Maintenance Console When country/area data do not match Installing and Starting the Maintenance Console Installing the V-SIPGW16 Card to the PBX Under Configuration, click Slot Programming the V-SIPGW16 Card Programming Port Property Accessing Port PropertiesProgramming the V-SIPGW16 Card-Port Property Main Account User Name Authentication IDAuthentication Password Register Sending Interval RegisterRegister Ability Un-Register Ability when port INS 4 NATRegistrar Server-Name Registrar Server-IP Address Option Stun Server-NameStun Server-IP Address Stun Server Port Number Session Refresh Session Timer-Session Timer Ability Session Refresh Session Timer-Session Expire TimerSession Refresh Session Timer-Refresh Method Proxy-Require Option From Header-User Part Calling PartyHeader Type Called Party Voice/FAX Type Packet Sampling Time G.711µ IP Codec Priority-1st, 2nd, 3rdPacket Sampling Time G.711A Packet Sampling Time G.729A Voice Activity Detection for G.711FAX Sending Method Maximum Bit Rate RTP QoS-ToS Priority 9 RTP/RTCPRTP QoS Ability 10 T.38 FAX Udptl Error Correction Redundancy FAX Max DatagramFAX Udptl Redundancy count for T.30 messages FAX Udptl Redundancy count for data 11 T.38 Option FAX Rate Management MethodFAX QoS Available FAX QoS-ToS Priority 12 DSP FAX QoS-ToS TypeFAX QoS-DSCP FAX QoS-HEX Supplementary Service Cnip Send Cnip Receive Value Range Accessing Card Properties Programming the V-SIPGW16 Card-Card PropertyCard Property Programming Card Property DNS Retry Interval Timer Manual Preferred DNS Server IP AddressManual Alternate DNS Server IP Address Manual DNS Server Port Number DNS SRV Record Resolve Ability Accessing Shelf Properties Programming the V-SIPGW16 Card-Shelf PropertyProgramming Shelf Property SIP Client Port Number NAT Voice RTP UDP Port No NAT Keep Alive Packet Sending AbilityNAT Keep Alive Packet Type NAT Keep Alive Packet Sending Interval Stun External Address Detection Retry Counter Stun Resending IntervalSIP Called Party Number Check Ability Symmetric Response Routing Ability Timer SIP T1 Timer Section Maintenance Configuration Management Importing/Exporting V-SIPGW16 Provider ProfilesTo import provider profiles To export provider profiles To transfer trace data to the PC SIPGW16 Protocol TraceTo save trace data to the SD Memory Card SIPGW16 Protocol Trace Index Index Programming Manual for Virtual SIP Trunk Card PSQX5028ZA KK1008TE0