Belkin OmniView manual Modem Server IP Address, Modem Client IP Address

4-5 Device Settings

Menu Options

5.Modem Server IP Address

This IP address will be assigned to the RIPM itself during the PPP handshake. Since it is a point-to-point IP connection, virtually any IP

address may be assigned, but you must make sure that it does not interfere with the IP settings of the RIPM and your console computer. The default value will work in most cases.

6.Modem Client IP Address

This IP address will be assigned to your console computer during the PPP handshake. Since it is a point-to-point IP connection, virtually any IP address may be assigned, but you must make sure that the assigned IP is not interfering with the IP settings of the RIPM and your console computer. The default value will work in most cases.

7.Pass-Through Access to Serial Port via Telnet

Using this option, it is possible to connect an arbitrary device to the serial port and access it (assuming it provides terminal support) via Telnet. Select the appropriate options for the serial port and use the Telnet console or a standard Telnet client to connect to the RIPM. For more information about the Telnet interface, refer to the “Telnet Console” section.

Note: Check www.belkin.com for a list of compatible modems.

61