![](/images/new-backgrounds/1174226/17422685x1.webp)
Menu Options |
6.Establish drive redirection by pressing the “Connect” button once. If all the settings are correct, the status bar displays that the connection has been established, the “Connect” button is disabled, and the “Disconnect” button is enabled. In the event of an error, the status line shows the error message.
The
7.Use the “Disconnect” button to stop a drive redirection after the process has started.
8.Click “Exit” to shut down the
9.Use the “Hide to Tray” button to minimize the application without terminating it completely. An active connection will remain until you close the application. You can access the software by
Options
Disable Drive Redirection
This switches off drive redirection.
Force Read-Only Connections
This switches off write support for drive redirection.
Click “Apply” to submit your changes.
1
2
3
4
5
6
section
40