![](/images/new-backgrounds/1174226/174226125x1.webp)
Menu Options |
Serial Port
1
2
3
4
5
6
7
The RIPM Serial Settings allow you to specify which device is connected to the serial port and how to use it. To access the serial interface, a null modem cable is required.
1. Configuration or Console Login
Do not use the serial port for any special function; use it only for the initial configuration.
2.Modem
The RIPM offers remote access using a telephone line in addition to standard access over a
3.Serial-Line Speed
The speed with which the RIPM is communicating with the modem. Most modems available today will support the default value of 115.200bps. If you are using an old modem and discovering problems, try to lower this speed.
4.Modem Init String
The initialization string used by the RIPM to initialize the modem. The default value will work with all standard modems directly connected to a telephone line. If you have a special modem, or if your modem is connected to a local telephone switch that requires a special dial sequence in order to establish a connection to the public telephone network, you can change this setting by using a new string. Refer to the section in your modem’s manual about AT command syntax.
1
2
3
4
5
6
section
60