Belkin OmniView manual Users, User Management

4-3 User Management Menu Options

Users

1

2

3

4

5

6

7

User Management

The RIPM comes with a pre-configured user account for the administrator that has fixed permissions. This user has all possible rights to configure the device and to use all functions the RIPM offers. Upon delivery, the account for the user “administrator” has the password “belkin”. Make sure to change the password immediately after you have installed and accessed your RIPM for the first time. A full list of available options follows. This list can only be seen by the administrator.

1.Existing Users

Select an existing user for modification. Once a user has been selected, click the “lookup” button to see the user information.

2.New Username

The new username for the selected account.

3.Password

The password for the login name. It must be at least four characters long.

4.Confirm Password

Confirmation of the password above.

5.Email Address This is optional.

6.Mobile Number This is also optional.

7.Role

In addition to being an administrator or an ordinary user, each user can be a member of a group (named a “role”). Choose the desired role from the selection box.

To create a new user, press the “Create” button. The “Modify” button changes the displayed user settings. To delete a user, press the “Delete” button.

Note: The RIPM is equipped with a host-independent processor and memory unit, both of which have a limitation in terms of processing instructions and memory space. To guarantee an acceptable response

time, Belkin recommends that you do NOT exceed a total of 25 users connected to the RIPM at the same time. The memory space that is available on the RIPM depends on the configuration and usage of the RIPM (log file entries, etc.).

1

2

3

4

5

6

section

44