HP 2103R-CSDI ABOUT THIS GUIDE, Introduction, Audience, How to Use This Guide, ■ Network manager or administrator, ■ Trained hardware installer or service personnel

ABOUT THIS GUIDE

Introduction	This guide describes how to install and configure a 3Com® ONline™ or
	ONcore® Edge Router module into the 3Com ONline System Concentrator
	or ONcore Switching Hub. In addition, this guide provides troubleshooting
	suggestions in case a problem arises with the module.
	If the information in the release notes shipped with your product differs from
	the information in this guide, follow the release note instructions.
Audience	This guide is intended for the following people at your site:
	■ Network manager or administrator
	■ Trained hardware installer or service personnel

How to Use This Guide

Table 1 shows the location of specific information.

Table 1 How to Use This Guide

If you are looking for:	Turn to:
General information about the Edge Router module	Chapter 1
Description of the module architecture
Typical applications of the Edge Router module
Features of the Edge Router module
An overview of the installation and configuration process	Chapter 2
Procedures for unpacking the Edge Router module
Procedures for preparing to install the Edge Router module
Procedures for installing the Edge Router module
An overview of the managed configuration process	Chapter 3
Procedures for attaching a management terminal
Procedures for configuring Edge Router carrier parameters