KRA585(UK) User Guide.qxd 10/14/04 2:32 PM Page 10
How to use the machine – Auto Mode
Rinse and fill the water container with fresh cold water. Turn on the machine by pressing the on/off switch. Open the brew mechanism. Opening the brew mechanism will initiate the heating of the water and the HEATING light will flash.
Place a clean cup on the cup stand, adjusting the height of the stand up or down so that the rim of the cup is close to the brew mechanism.
• To adjust the cup stand, insert your finger in the centre of the stand, lift and turn.
• To avoid spilling over, please choose the right sized cup for the drink you are making. See page 3 “Tips for the Perfect Cup”.
Position your choice of
When the AUTO light illuminates, press and release the start/ stop button. Brewing will start automatically. There may be a short pause during brewing; this is normal. The AUTO light flashes throughout the brew cycle. When the machine has finished brewing, the indicator light will move from AUTO to MANUAL and then, after a delay of 30 seconds, to HEATING.
•When the indicator light moves to MANUAL, you can customise your cup as described in “Manual Mode” (See page 8).
•At any time during the “Auto Mode”, you can stop the brew cycle by pressing and releasing the start/stop button. The machine will stop and any remaining liquid inside the
Open the brew mechanism, remove the
You can prepare the next beverage right away by repeating steps 2 – 5.
•Always remove the used
•Please ensure that there is enough water in the water container. If the water level is too low, all the indicator lights will flash, signalling that the water container needs to be refilled.
6 How to use your machine – Auto Mode | How to use your machine – Auto Mode 7 |