Technical specifications

General

Power Requirements

115V or 230V AC, set by voltage selector switch on rear panel

Power consumption

<45VA

Dimensions

430mm x 90mm x 280mm

Weight

net: 6.2kg; packed: 7.8kg

Video outputs

 

Composite video

1 x gold plated phono:

 

1V pk-pk into 75Ω

S-Video

1 x 4-pin mini-DIN:

 

Y 1V pk-pk in 75Ω, C 0.3V pk-pk into 75Ω

SCART socket with RGB video

All 0.7V into 75Ω, composite video 1V into 75Ω, and stereo audio.

 

Auto switching of TV with aspect ratio control

Progressive scan video

Pure Progressivemotion adaptive 4-field processing by Silicon Image Corporation

 

3 gold plated phono sockets:

 

Y 1V pk-pk into 75Ω; Pb 0.7V pk-pk into 75Ω; Pr 0.7V pk-pk into 75Ω

Audio outputs

 

Analogue audio outputs

6 channel outputs on gold plated phono sockets

Output level

2.2V rms at 0dB signal, 4V rms on left and right with HDCD discs

Frequency response

20Hz to 20kHz (+0.1db, –0.5dB)

THD+N

<0.005% for 1kHz 0dB signal, measured 22Hz–22kHz, unweighted

Signal-to-noise ratio

105dB, measured 20Hz–20kHz, unweighted

Digital audio output (IEC958)

PCM/Dolby digital/MPEG/DTS on gold plated phono (coaxial) and TOSLINK (optical)

Accessories supplied

 

 

CR-314 remote control

 

2 x AAA batteries

 

Mains lead

E&OE

 

NOTE: All specification values are typical unless otherwise stated.

Continual improvement policy

Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.

24

Page 24
Image 24
Arcam DV27A manual Technical specifications