Fujitsu 9045 Set Commands, Store tcpip from current, Set date year month day, Set date 1997 02

Set Commands

store tcpip tcp opts [-]keepalive [-]disbufmgmt

store tcpip tcp opts keepalive -disbufmgmt

Controls whether the PrintNet maintains a connection with a host when data cannot be accepted into its buffer. Normally the keepalive feature is enabled so when the printer cannot accept data, the print job connection is maintained and continued once the situation clears. If disbufmgmt is disabled (i.e., “-”), the PrintNet will not buffer any data when there is a blocked situation with the printer. Normally it is best to have both keepalive and disbufmgmt enabled.

store tcpip tcp access [root] adddel IPaddress

store tcpip tcp access add 192.75.11.25

Add or remove an entry from the PrintNet TCP access list defined by IPaddress. If the list has an entry, only this host can print to and remotely interact with the print server.

store tcpip proxy adddel targetIPaddress

store tcpip from default

Set all TCP/IP network settings back to factory defaults.

store tcpip from current

Store all current TCP/IP network settings to flash memory so they are retained after a power cycle. This ensures all current settings match what is stored in flash memory.

Set Commands

These settings alter the current or working settings in memory only. Therefore, they will be lost if the PrintNet is power cycled. To ensure this does not happen, be sure to issue a “save” command so the current settings get written to flash memory.

set date year month day

set date 1997 02 10

Set the current date noting the four-digit year, the two-digit month from 1 through 12, and the day being the number in the month. If the PrintNet is reset, this value will be lost so you will need to set the date again.

131