Fujitsu 9045 user manual Set dest destination name newname, Set dest destination model modelname

Chapter 8 Complete Command List

set dest destination name newname

set dest d1prn name laser

Change the current name of the destination to a new name as indicated by newname. This newname must be nine characters or less or it will be truncated. These names are case sensitive.

set dest destination backchannel prn [prn]

set dest d1prn backchannel prn

Establish a return path for printer feedback for a given destination. Since the PrintNet I/O port is bi-directional, however, you will most likely use the same I/O port that the destination is currently sending jobs to.

set dest destination model modelname

set dest d1prn model m4

Associate a model with a destination. Jobs sent to the named destination are processed according to the options defined in the named model.

set dest destination logpath logpathname

set dest d1prn logpath l4

Associate a logpath with a destination. Jobs sent to the named destination are logged according to the settings defined in the named logpath.

set dest destination service [[-]socket][[-]lpd] [[-]lpsched] [[-]rprinter] [[-]pserver] [[-]netbios] [[-]ftpd]

set dest d1prn service -netbios

Set the destination to handle only certain print services. To add a service, specify the service name. To disable a service, use “-” before the name. The available services are:

socket	Direct socket printing via TCP/IP.
lpd	LPR printing with TCP/IP including LPR clients on
	any platform.
lpsched	LP or System V printing with TCP/IP.
rprinter	Novell RPRINTER support.
pserver	Novell PSERVER support.

132