Configuration Using IPAssign
13.If you want to store the TCP/IP settings into the PrintNet flash memory via a browser, click on LAUNCH BROWSER at the next window that displays. This will prevent you from losing the settings after a power cycle. If not, click “No.”
14.Read the text in the “Configuration Information” window that displays and click OK to launch your Web browser.
NOTE: If you are returned to the IPAssign main dialogue box, you will be unable to launch your browser this way. Please load it manually and go to the URL, “http://PrintNetIPaddress/
networkConf.html” (e.g., “ http://192.75.11.9/ networkConf.html”) or use a Telnet server: “ Telnet
IP_address.”
15.Once your Web browser is loaded and you are prompted for a “User ID,” type “ root.”
16.At the “Password” prompt, press ENTER since there is no default password configured and click OK.
17.At the “Network Configuration” HTML form that displays, fill in the PrintNet IP address under the “IP Address” field. Figure 9 shows an example configuration form.
18.Click in the field labeled “Subnet Mask” and fill in the PrintNet subnet mask.
NOTE: If you would like to communicate with the PrintNet from across routers, you will need to fill in an entry within the “Routing” section. Please see “Communicating Across Routers” on page 37 for more details.
19.Click on the SUBMIT button when done.
20.Turn the printer off, then on again so the changes take effect, or click on the “System” link at the top of the “Network Configuration” HTML form. Once at the “System” form, click on the REBOOT button.
33
