Fujitsu 9045 user manual Set snmp manager index ipaddress trap-community

Set Commands

set snmp manager index ipaddress trap-community

The PrintNet continuously generates traps but unless the trap table is filled in, no SNMP manager will receive this information. To set the PrintNet to send traps to a particular SNMP manager, use this command to add a SNMP manager to the trap table.

index is the idex number of the trap table. ipaddress is the IP address of the SNMP manager receiving traps. trap-communityis the community string sent along with the trap information.

set sysinfo name newname

set sysinfo name salesprinter

Set a descriptive name defined by newname for PrintNet identification purposes. This is not used in the operation of the print server in any way.

set sysinfo location description set sysinfo location salesdept

Set the physical location of the PrintNet. This is for identification purposes and is not used in the operation of the print server in any way.

set sysinfo contact contactname set sysinfo contact Paul_Harris

Set a person or department to contact in case of print server trouble.

set sysinfo loginfo [-]sys [-]tcp [-]ipx [-]spx set sysinfo loginfo -sys ipx

Set the PrintNet debugging information type. Usually this information includes unexpected errors or exceptions from the print server divided into these groups:

sys	General system messages.
tcp	TCP stack messages.
ipx	IPX stack messages.
spx	SPX stack messages.

NOTE: This is not printer or job logging information.

137