
Chapter 8 Complete Command List
set sysinfo logport nullsyslog set sysinfo logport null
Define where the debugging information should be sent to. This can be sent to an output device off of the PrintNet I/O port or to a central TCP/IP host running a SYSLOG daemon. To set this host, use the command “set sysinfo syslog hostIPaddress.”
set sysinfo email emailname@IPaddress set sysinfo email joe@192.75.11.5
Define the user email address to receive printer and job logging information from a particular logpath on the PrintNet. emailname is the host or IP name of the user and IPaddress is the IP address where the mail is stored on your network.
set sysinfo syslog hostIPaddress set sysinfo syslog 192.75.11.30
Set the IP address of the host running the SYSLOG daemon. PrintNet debugging or print job and printer logging information can be sent to that IP address.
set sysinfo dns DNSserverIPaddress set sysinfo dns 192.75.11.2
Set your DNS server IP address so the PrintNet can resolve host names when used with its
set sysinfo descramblekey hexvalue set sysinfo descramblekey 1234
Set the key value used for descrambling print jobs that have passed through Printronix npscramble utility on a TCP/IP host. This key is a
set sysinfo module
Enable and disable certain network protocol stacks within the PrintNet. Sometimes it helps to disable any protocols you are not using on your network.
138