Fujitsu 9045 user manual Set logpath from default, Set logpath from stored, Onlcr

Chapter 8 Complete Command List

email	Particular user’s email address. This address is set
	using the “set sysinfo email
	emailname@IPaddress” command.
syslog	A central TCP/IP host running the SYSLOG
	daemon. This host is set using the “ set sysinfo
	syslog IPaddress” command.

set logpath from default

Set all logpath settings back to factory defaults.

set logpath from stored

Set all current logpath settings to the values stored in flash memory.

set model model name newname set model m1 name landscape

Change the current name of the model to a new name as indicated by newname. This newname must be nine characters or less or it will be truncated. These names are case sensitive.

set model model type raw set model m2 type raw

Set the model type to raw so that it does not process the data passing through it in any way.

set model model banner [pstextauto [after]] set model m2 banner text

Determine whether a banner page should be added for print jobs passing through the model mapped destination/queue. auto will determine which type is needed depending on the type of print job data passing through. By default, banner pages are added to the front of the job. If after is set, the banner page will come at the end.

set model model stty [[-]onlcr] [[-]descramble] [xtab tablengthnone]

set model m3 stty onlcr

Control extra job processing done by the model. The processing options are:

onlcr	Carriage return insertion for Unix text jobs. Adds
	carriage returns to text jobs with solitary linefeeds.
	This will prevent stair-stepped output or output
	running off the right side of the page.

134