
Chapter 8 Complete Command List
NOTE: To use a host or IP name instead of the address, you must have set the DNS server on the PrintNet. Use the command “set sysinfo dns...” to do this.
telnet hostIPaddress [escapecharacter] telnet 192.75.11.35
Start a Telnet session with another TCP/IP host specified by hostIPaddress on the PrintNet network. If escapecharacter is used, it resets the key sequence used to exit the Telnet session. It will return you to the telnet> prompt where you can execute “quit.” Use the “keycode” command to find out exact escape characters if needed. The default character is
NOTE: To use a host or IP name instead of the address, you must have set the DNS server on the PrintNet. Use the command “set sysinfo dns...” to do this.
chr string
Echo string or redirect string to an I/O port using “chr string >
ioport.”
keycode
Determine the hexadecimal value for a key to be used as the escape character with the PrintNet
146