Windows NT 4.0 Host Setup Problems

Are you logged in as the “Administrator”?

This installation requires administrator privileges.

“LPR port” is not listed in step 5.

Cancel the installation and install Microsoft TCP/IP printing service on the server.

LPR configuration warning during step 6.

The Ethernet cable is not plugged in, or printer is not turned on. This message is a communication failure between the NT server and the PrintNet card. Check cabling, IP address settings, gateway, etc.

Test page does not print or prints incorrectly.

1.Is the printer online? Re-send test page.

2.The print queue name in step 6 should be “d1prn”; however, the name can be changed. To verify the queue names, print an Ethernet Test Page. Refer to your Operating Manual for information.

3.The Printronix NT print driver requires P-Series emulation active on the printer. The Generic/Text driver should print in any printer emulation.

4.Delete then re-install Microsoft TCP/IP Print service on the server.

55

Page 55
Image 55
Fujitsu 9045 user manual Windows NT 4.0 Host Setup Problems