Chapter | 1 | Interfaces |
|
|
|
|
|
|
10/100Base-T
The PrintNet interface card at the rear of the printer for the
DIP Switches 1 2
STAT (System Status) 
NET (Data to Network)
Figure 2. Status Indicator Lights and Dipswitches (10/100Base-T)
Run and Auto Reset Modes
Run Mode is the normal operating state of the PrintNet. Auto Reset mode is entered when the watchdog timer is triggered and the Print Server resets itself. In either mode, the STAT LED flashes at a varying rate, depending on whether the unit IP address is configured. The Run Mode and Auto Reset Mode indicator descriptions are given in Table 4.
Table 4. Run Mode and Auto Reset Mode Indicator Descriptions
STAT | Rate | Indication |
|
|
|
|
|
|
OFF | flashes on once per second | Normal Mode, IP address |
|
| configured |
|
|
|
OFF | flashes on 2 times per second | IP address not configured |
|
|
|
ON | flashes off once per second | Download (MOS) |
|
|
|
ON | flashes off twice per second | Error |
|
|
|
ON | constantly | Indicates link integrity |
|
|
|
ON | flashes off 1/3 second | Flashes off 1/3 second each |
|
| time a packet is transmitted |
|
|
|
18
