Fujitsu 9045 user manual Using Html Forms, Store pserver name newname, Store pserver name micro1

Chapter 5 Novell PrintNet Configuration

Using HTML Forms

When defining a new print queue on a Novell file server, a new print server must be defined to represent the PrintNet. This name must match the pre-defined name given to the print server. By default, this name is in the format “M_xxxxxx” where “ xxxxxx” equals the last six digits of the PrintNet Ethernet address found on a configuration printout or control panel settings under Ethernet parameters, MAC Address

(e.g., M_071C1A).

To use the HTML forms to define a print queue, do the following:

1.Load a Web browser on a network station that can communicate with the print server over TCP/IP. The command to change the print server name is:

Syntax:

store pserver name newname

Example to change the name to micro1:

store pserver name micro1

2.Direct your Web browser to URL

“http://PrintNetIPaddress/adminConf.html” (e.g., “http://192.75.11.9/adminConf.html”)

NOTE: If prompted for a “User ID” and password first, type in “ root” for the ID and press ENTER at the password prompt since there is no password by default.

3.At the “Administration Configuration” HTML form that displays, highlight the field beside the “Name” heading and type in the new name of the print server.

4.Click on the SUBMIT button when done and physically repower the printer to make the new setting take effect.

78