Fujitsu 9045 user manual Set dest from default, Set dest from stored

	Set Commands
netbios	Windows 95 and Windows for Workgroups printing.
ftpd	Printing using the File Transfer Protocol (FTP) via
	TCP/IP.

set dest from default

Set all destination settings back to factory defaults.

set dest from stored

Set all current destination settings to the values stored in flash memory.

set logpath logpath name newname

set logpath l1 name pagecount

Change the current name of the logpath to a new name as indicated by newname. This newname must be nine characters or less or it will be truncated. These names are case sensitive.

set logpath logpath type [[-]job] [[-]user] [[-]pgcnt] [[-]cksum] [[-]printer] [[-]ioport]

set logpath l2 type job user printer pgcnt

Establish the type of printer and print job logging to be done within this logpath. The options are:

job	Job ID, username, etc.
user	User ID along with three messages per job about
	start and finish.
pgcnt	For total pages printed in a job.
cksum	16-bit checksum value to confirm integrity of data
	printed.
printer	For special printer feedback.
ioport	Printer error messages determined through the
	parallel port pins.

set logpath logpath port TCPportnumber emailsyslog

set logpath l3 port 2000

Determine where the log information should be sent for a print job or attached printer. The choices are:

TCPportnumberTCP port number ranging from 1024 to 65000.

133