Fujitsu 9045 PrintNet Cannot Be Found on the Network, Html Configuration Forms Will Not Display

Chapter 3 Windows Troubleshooting Tips

PrintNet Cannot Be Found on the Network

•Have you assigned the PrintNet a unique and valid IP address which corresponds with the other IP addresses on your network? For example, are you sure no other device is using this IP address?

•Are you sure you are trying to talk to the PrintNet from a Windows station on the same subnet? Currently, the print server can only be seen locally unless you configured a routing entry earlier.

•If you look at the back of the printer, is the STAT LED flashing once a second or is it quicker than that? A slower, once-a-second rate tells you that the print server is in fact configured with an IP address. A faster rate says it knows nothing about this so you may need to try the configuration process again.

•Have you confirmed that the network connection to the PrintNet is working correctly? Trying different network cables and locations will help narrow down the problem.

HTML Configuration Forms Will Not Display

•Can you “ping” the PrintNet from your Windows station? If not, please refer to “PrintNet Will Not Talk on the Network” above.

•Have you used the correct URL for the PrintNet home page? It should be “http://PrintNetIPaddress ”

(e.g., “http://192.75.11.9”).

Errors Occur when Defining an LPR Printer

•Can you “ping” the PrintNet from your Windows NT station? If not, please refer to “PrintNet Will Not Talk on the Network” above.

•Did you specify the correct IP address or host name for the PrintNet in the first field of the “Add LPR Compatible Printer” box?

•Did you specify a valid destination/queue on the PrintNet in the second field of the “Add LPR Compatible Printer” dialogue box? If so, did you also enter it in lowercase letters?

50