List Commands
list diff
List the differences between the current settings and the stored settings in flash memory. Normally, you want these values to match so issue a “save” command followed by a “reset.”
list ifc
List the current UTP interface settings (e.g., link integrity).
list key
List the license details and license key number.
list logins
List any active user logins on the PrintNet.
list logpath
List the current logpath settings (e.g., names and mapped destinations).
list model
List the current model settings (e.g., names and mapped destinations).
list pserver
List the current general print server settings (e.g., print server name and Novell mode).
list prn
List the current parallel port setting (e.g., mode).
list rprinter
List any current RPRINTER definitions.
list snmp
List Trap Table containing SNMP Managers.
list sysinfo
List the current PrintNet system information (e.g., contact name and protocol stacks enabled).
list tcpip
List all current TCP/IP network settings (e.g., IP address and subnet mask).
list test
List the status of output tests on the I/O ports.
141