Chapter 10
Factory Settings | S2 jumper position stating all factory default |
| settings are to be used while the PrintNet is up |
| and running. |
Firmware Panic | Unrecoverable errors detected by the PrintNet |
| firmware force the Print Server into Firmware |
| Panic mode. Manually reset the PrintNet to |
| resume operation. |
Flash | Stores firmware code and configurable settings. |
| Allows for upgrades without replacing hardware |
| inside the PrintNet. |
FTP | File Transfer Protocol. Used for transferring files |
| from one TCP/IP host to another and used in the |
| upgrade process. |
Hardware Exception | Buss errors, address errors, and illegal |
| instructions force the PrintNet into this non- |
| operational mode. |
HTML | HyperText Markup Language. Format used for |
| documents viewable on the World Wide Web. |
ifnum | Interface Number. Represents the network |
| interface. With a PrintNet, this will always be “1” |
| for Ethernet. |
interface script | Unix host filter file that processes the print job |
| before it is sent over the network to the PrintNet. |
I/O port | Port for attaching peripherals to. The PrintNet |
| provides four: PRN1, PRN2, COM1, COM2. |
IP Address | The Internet Protocol Address. A numeric |
| address such as 123.45.61.23 which identifies a |
| printer or server in a LAN or WAN. |
LAN | Local Area Network. |
LED | Light Emitting Diode. The printer has an LED |
| display which shows the status of the printer to |
| the operator. |
158
