HP UX Internet and Networking Software manual Default, Workgroup NET=workgroupnetaddress

NET.CFG Options Reference

NetWare DOS Requester Option

NMR.VLM

RSA.VLM

WSASN1.VLM

WSDRVPRN.VLM

WSREG.VLM

WSSNMP.VLM

WSTRAP.VLM

You must specify the complete filename, including the .VLM extension.

Syntax	vlm=path_vlm
Default	None
Range	1 to 50
Modules	VLM.EXE
Example	To load AUTO.VLM, RSA.VLM, and NMR.VLM with the
	core modules, you would place the following lines in your
	NET.CFG file:
	netware dos requester
	vlm=c:\nwclient\auto.vlm
	vlm=c:\nwclient\rsa.vlm
	vlm=c:\nwclient\nmr.vlm

WORKGROUP NET=workgroup_net_address

Provides a way for your client workstation to find workgroup information outside of your local network.

If your client workstation resides physically on a network segment other than the one that the workgroup you want to connect to is on, setting this address ensures that a connection is found.

This parameter and value should be modified only with the Personal NetWare utilities and should not be edited manually. Manually setting a value for this parameter might result in loss of connection.

2-101