System Messages

Action: Either update the .MSG file with a valid copy or delete the file. The NetWare® DOS Requester™ software uses the default messages that are bound to the binary files.

IPXNCP-1.00-5: <Module1>.VLM is not loaded. The <module2>.VLM file cannot be loaded before <module1>.VLM. Load the <module1>.VLM file first then try to load the <module2>.VLM file.

Explanation: The <module2>.VLM file requires that the <module1>.VLM file be loaded first. Either the current configuration has <module1>.VLM and <module2>.VLM loading out of order, or <module1>.VLM did not load successfully.

Action: Make sure that <module1>.VLM is configured to load before <module2>.VLM. To do this, change the load order of the VLM= parameter in the NET.CFG file.

IPXNCP-1.00-7: In order to load the <module3>.VLM, one of the

following VLMs must be loaded: <module1>.VLM, <module2>.VLM.

Explanation: The <module3>.VLM file requires that the <module1>.VLM or <module2>.VLM file be loaded first. Either the current configuration has <module3>.VLM loading before <module1>.VLM or <module2>.VLM, or <module1>.VLM or <module2>.VLM did not load successfully.

Action: Make sure that <module1>.VLM or <module2>.VLM loads successfully before <module3>.VLM.

IPXNCP-1.00-42: There is a missing or invalid value for ‘<parameter>’ on line <number> of the configuration file. This entry will be ignored. Correct the line specified in the configuration file before continuing.

Explanation: The configuration file contains a parameter that has an invalid value or that does not specify a value. This invalid line is ignored by the configuration process.

Action: No action is required at this point. However, to avoid this message the next time the VLM.EXE file is loaded, delete or correct the line specified by the error message.

IPXNCP-1.00-43: There is a missing or invalid ON/OFF value for ‘<parameter>’ on line <number> of the configuration file. This entry will be ignored. Correct the line specified in the configuration file before continuing.

4-14