HP UX Internet and Networking Software manual Load LOW IPXNCP=on off, Load LOW REDIR=on off

NOTE:

NOTE:

NET.CFG Options Reference

NetWare DOS Requester Option

Use the VLM /D command line parameter to determine how much conventional memory is used by this parameter setting.

LOAD LOW IPXNCP=[on off]

Specifies whether the transport manager for IPX is loaded in high (XMS or EMS) or conventional memory.

By default, the transport protocol implementation for IPX, IPXNCP.VLM, is loaded in conventional memory.

If the value for this parameter is set to “off,” IPXNCP.VLM loads in upper memory, saving memory but sacrificing performance.

Syntax	load low ipxncp=[on off]
Default	on
Modules	IPXNCP.VLM
Example	To load IPXNCP.VLM in upper memory, thereby saving
	memory but sacrificing performance, you would place the
	following lines in your NET.CFG file:
	netware dos requester
	load low ipxncp=off

Use the VLM /D command line parameter to determine how much conventional memory is used by this parameter setting.

LOAD LOW REDIR=[on off]

Specifies whether the redirector is loaded in high or conventional memory.

This parameter influences the speed of repeated small file read/writes to the network, such as database transactions.

By default, the redirector portion of the NetWare DOS Requester software, REDIR.VLM, is loaded in high memory.

If the value for this parameter is set to “on,” REDIR.VLM loads in conventional memory, increasing performance but sacrificing memory.

2-79