Preface

Documentation Conventions

This manual uses the following Novell® conventions:

Asterisk ( * )

An asterisk denotes a trademarked name belonging to a third-party company. Novell trademarks are denoted with specific trademark symbols (®, ™, etc.).

An ownership listing of all (Novell and third-party) trademarks cited in a manual can be found either on the disclaimer page in the front or in a “Trademarks” section at the back of printed manuals. A trademarks list is also available in the DynaText* online documentation.

Commands

Boldface characters indicate items that you type, such as commands and options. You can use any combination of uppercase and lowercase letters.

For example:

C:\A INSTALL

Delimiter Bar ( )

In syntax examples, a delimiter bar separating two command options indicates that you can choose one of the options.

For example:

–S –R

Do not type the bar.

DOS Commands

DOS commands and command option letters are shown in uppercase letters. For example: FTPD.

Because DOS is not case-sensitive, you can type DOS commands in uppercase or lowercase letters.

DOS Filenames, Directory Names, and Pathnames

DOS filenames, directory names, and pathnames are shown in uppercase letters. For example, AUTOEXEC.BAT.

Because DOS is not case-sensitive, you can type these names in uppercase or

v