NET.CFG Options Reference
Using NET.CFG Options and Parameters
Using NET.CFG Options and ParametersNetWare and Personal NetWare™ workstations support the following configuration options in the NET.CFG file:
•Desktop SNMP Option
•Link Driver Option
•Link Support Option
•NetWare DOS Requester Option
•Protocol IPX Option
•Protocol SPX Option
•Protocol TCPIP Option
•Transport Provider IPX UDP Option
NOTE:Because many products use the NET.CFG file for managing configuration information, this might not be a comprehensive list of all the options used in your NET.CFG file.
See the
Table
*The default value is the maximum value for NetWare 2 and NetWare 3™ networks.
+This option is valid for NetWare 4™ networks only.
~Defaults vary depending on your network setup. See the corresponding option heading in this chapter for specific information.