System Messages
Explanation: The configuration file contains a parameter that has an invalid value or that does not specify a value. This invalid line is ignored by the configuration process.
Action: No action is required at this point. However, to avoid this message the next time the VLM.EXE file is loaded, delete or correct the line specified by the error message.
Explanation: The configuration file contains a parameter that is defined to use either an ON or OFF value, but a different value or no value has been specified. This invalid line is ignored by the configuration process.
Action: No action is required at this point. However, to avoid this message the next time the VLM.EXE file is loaded, delete or correct the line specified by the error message.
Explanation: A configurable parameter has been configured too high or too low to be valid. The parameter is specified on the line following the message.
Action: Check and correct the parameter specified in the NET.CFG file. See Chapter 2, “NET.CFG Options Reference,” for more information.
Explanation: The NetWare® DOS Requester™ software requires DOS 3.1 or later in order to operate. Because the current DOS version is not 3.1 or later, the NetWare DOS Requester cannot be loaded.
Action: Upgrade the DOS version on your machine to 3.1 or later.