HP UX Internet and Networking Software manual Print HEADER=number, Print TAIL=number

NET.CFG Options Reference

NetWare DOS Requester Option

Modules	PRINT.VLM
Example	To set the buffer size for printing to 86, you would place the
	following lines in your NET.CFG file:
	netware dos requester
	print buffer size=86

NOTE:While increasing the speed in some of your printing output, this parameter also increases memory use.

PRINT HEADER=number

Sets the size of the buffer (in bytes) that holds the information used to initialize a printer for each print job.

If you send print jobs with many instructions in the header (such as initializing a printer for an emulated mode or changing defaults, font selections, page length, or orientation) and the printer is not delivering all the requested attributes, increase the print header size.

Syntax	print header=number
Default	64
Range	0 to 1024
Modules	PRINT.VLM
Example	To increase the size of the print header in order for all the
	printer attributes of a larger header to be delivered, you could
	place the following lines in your NET.CFG file:
	netware dos requester
	print header=960

PRINT TAIL=number

Sets the size of the buffer (in bytes) that holds the information used to reset the printer after a print job.

If your printer is not clearing out the buffer completely or resetting after each print job, increase the print tail size.

2-92