HP UX Internet and Networking Software manual Message TIMEOUT=number, Default Range

NET.CFG Options Reference

NetWare DOS Requester Option

The values are as follows:

0 = Display copyright message and critical errors

1 = Display warning messages

2 = Display program load information for VLM programs

3 = Display configuration information

4 = Display diagnostic information

Syntax	message level=number
Default	1
Modules	VLM.EXE
Example	To display only configuration information, you would
	place the following lines in your NET.CFG file:
	netware dos requester
	message level=3

MESSAGE TIMEOUT=number

Defines how long (in ticks) before broadcast messages are cleared from the screen without user intervention.

Syntax	message timeout=number
Default	0
Range	0 (wait for user) to 10,000 (approximately nine minutes)
Modules	NWP.VLM
Example	To automatically clear messages from a user’s screen after
	approximately five minutes, you would place the
	following lines in your NET.CFG file:
	netware dos requester
	message timeout=5000

2-84