HP UX Internet and Networking Software manual Bind LANdrivername #number, INT64 on off

NET.CFG Options Reference

Protocol IPX Option

BIND LAN_driver_name [#number]

Usually a protocol binds to the first LAN driver it finds. This parameter forces the protocol to bind to the LAN driver you specify.

You are informed of the board number you are binding to when the LAN driver is loading.

Syntax	bind LAN_driver_name [#number]
	Replace LAN_driver_name with the name of the
	LAN driver you want the protocol to bind to.
	Replace number with the occurrence of the LAN
	driver you are loading. If you are binding only
	one LAN driver, you do not need to set this value.
	If you want to bind multiple LAN drivers, specify
	the BIND parameter multiple times, each on a
	different line in the NET.CFG file.
Default	None
Example	To bind protocol IPXODI to your NE2000 LAN driver,
	you would place the following lines in your NET.CFG file:
	protocol ipx
	bind ne2000
	To bind protocol IPXODI to the second and third
	logical LAN drivers, you would place the following
	lines in your NET.CFG file:
	protocol ipx
	bind ne2000 #2, #3

NOTE:Some protocols do not support binding to multiple LAN drivers. Refer to the protocol’s documentation for binding information.

INT64 [on off]

Allows applications to use interrupt 64h to access IPX services.

2-104