System Messages | HP UX Internet and Networking Software specification

System Messages

BIND-1.00-45: The parameter speciﬁed for the following option was out of range and has been adjusted.

Explanation: A conﬁgurable parameter has been conﬁgured too high or too low to be valid. The parameter is speciﬁed on the line following the message.

Action: Check and correct the parameter speciﬁed in the NET.CFG ﬁle. See Chapter 2, “NET.CFG Options Reference,” for more information.

CONN-1.00-1: The message ﬁle <name> is invalid. The program cannot be loaded.

Explanation: The .MSG ﬁle is invalid. This problem could be the result of a corrupted ﬁle, a bad translation, or an outdated ﬁle version.

Action: Either update the .MSG ﬁle with a valid copy or delete the ﬁle. The NetWare® DOS Requester™ software uses the default messages that are bound to the binary ﬁles.

CONN-1.00-5: <Module1>.VLM is not loaded. The <module2>.VLM ﬁle cannot be loaded before <module1>.VLM. Load the <module1>.VLM ﬁle ﬁrst then try to load the <module2>.VLM ﬁle.

Explanation: The <module2>.VLM ﬁle requires that the <module1>.VLM ﬁle be loaded ﬁrst. Either the current conﬁguration has <module1>.VLM and <module2>.VLM loading out of order, or <module1>.VLM did not load successfully.

Action: Make sure that <module1>.VLM is conﬁgured to load before <module2>.VLM. To do this, change the load order of the VLM= parameter in the NET.CFG ﬁle.

CONN-1.00-7: In order to load the <module3>.VLM, one of the

following VLMs must be loaded: <module1>.VLM, <module2>.VLM.

Explanation: The <module3>.VLM ﬁle requires that the <module1>.VLM or <module2>.VLM ﬁle be loaded ﬁrst. Either the current conﬁguration has <module3>.VLM loading before <module1>.VLM or <module2>.VLM, or <module1>.VLM or <module2>.VLM did not load successfully.

Action: Make sure that <module1>.VLM or <module2>.VLM loads successfully before <module3>.VLM.

4-5

Image 177

HP UX Internet and Networking Software manual System Messages

Contents

HP 9000 Networking HP Part No. J2771-90016Edition Hewlett-Packard Co Homestead Road Cupertino, CA 95014 USA Printing History Introduction Preface This manual uses the following Novell conventions Asterisk Documentation Conventions Syntax Vii Supplemental Documentation Preface Preface Contents Creating and Modifying a NET.CFG File NET.CFG Options Reference Overview 2-2 Introduction Alternate Link Driver Option NetWare DOS Requester Option Link Support Option Network PRINTERS=number Protocol IPX Option 103 Protocol SPX OptionProtocol Tcpip Option Introduction Core NetWare Client Software Transport Provider IPX UDP Option Dosnp Software Optimizing the NetWare Client Software Topic Overview Introduction Increasing Speed Using the Packet Burst ProtocolRequirement for Packet Burst How Packet Burst Works Using Large Internet Packet Functionality Configuring for Packet BurstWhen to Use Packet Burst Disabling Packet Burst Configuring for Large Internet Packet When to Use Large Internet PacketHow Large Internet Packet Works Disabling LIP Using NCP Packet Signature to Improve Security Improving SecurityHow NCP Packet Signature Works When to Use NCP Packet Signature NCP Packet Signature OptionsNCP Packet Signature Levels Level Number Explanation Solution Examples of Using Packet Signature LevelsEffective Packet Signature Levels Server = Client Workstation Is Publicly Accessible Installing NCP Packet SignatureWorkstation Setting Client Workstation Users Often Change Locations Disabling Packet Signature Server Setting Troubleshooting NCP Packet Signature Client Workstations Are Not Signing Packets ProblemClient Workstations Cannot Log Insecure Client Workstations Log In to a Secure Server Third-Party NLM Programs Do Not Work Using Other Client Security Guidelines Topic Reference Additional Information NET.CFG Options Reference NET.CFG Options Reference Introduction Entering Options and Parameters into the NET.CFG File Creating and Modifying a NET.CFG File Following ﬁgure illustrates the NET.CFG ﬁle format Sample NET.CFG FileFollowing is a sample NET.CFG ﬁle that NET.CFG File Format NET.CFG file Using NET.CFG Options and Parameters Link driver drivername NET.CFG Options Desktop snmpLink support Netware dos requester NET.CFG Options Protocol ipx Protocol spxProtocol tcpip Transport provider ipx udp Format of NET.CFG Reference Pages Using the NET.CFG Reference Pages Available Parameters and Values for the Desktop Snmp Option Desktop Snmp OptionCategory Parameters and Values MIB-II Asynchronous Timeout number Asynchronous Timeout ConnectionsSyntax Parameter and Value Community Types and Names Default Example Snmpenableauthentraps on Speciﬁes the monitor community name DefaultDesktop Snmp Option Parameters for Community Names Parameter Explanation Speciﬁes the control community name Community Access ManagementSpeciﬁes the trap community name Control Community name public private Value Explanation Desktop Snmp Option Values for Community Type Parameters Enables the value settings for the monitor community Enables the value settings for the control communityEnables the value settings for the trap community Example of NET.CFG Files Using the Community Name and Types MIB-II Management Information Base Support Desktop Snmp automatically supports three MIB-II groupsSystem and Snmp Groups Explains these parameters That an unauthorized user is tying to access the networkAuthority Management stations or reported in Snmp traps Syscontact contact Snmpenableauthentrap on off Syslocation location Informs the Snmp manager of your usernameSysname name Interface Group Example of NET.CFG File Including Each Group Support TCP/IP Groups Available Parameters and Values for the Link Driver Option Link Driver OptionLink Driver drivername This option has the following parameters and values BUS ID name number Bus Type Identiﬁcation Number ISA MCA Eisa Pcmcia PCIDMA #1 #2 channelnumber Frame frametypename addressingmode For example, the frame type Token-Ring can be used in LSB Frame Types, Protocols, and LAN Drivers Frame Type and Description Protocols LAN Drivers List of Frame Types, Protocols, and LAN Drivers For token ring, enable token ring frame types Ethernet LAN DriversToken-Ring LAN Drivers MAX Frame Size number IRQ #1 #2 interruptrequestnumber MEM #1 #2 hexstartingaddress hexlength Speciﬁes a memory range to be used by the network board Replace hexstartingaddress with Node Address hexaddress mode Lansup Port #1 #2 hexstartingaddress hexnumberofports Defined Protocols and Frame Types Allows existing LAN drivers to handle new network protocolsProtocol name hexprotocolID frametype Numbers Frame Protocol Frame Type Description Ethernetii IPX/SPXSlot number Driver Name Network Board COM Listing of Commonly Used ODI LAN Drivers E20ODI CeodiE2HODI E30ODI Madgeodi LansupNCRWL05 NE2 OC32TR16.COM NulldrvOCTOK16.COM OSH391R SMC PC600WS/650WS SmcarcwsT20ODI T30ODI Available Parameters and Values for the Link Support Option Link Support Option Buffers communicationnumber buffersize Default MAX Boards number Default Range Example Mempool number k MAX Stacks number Link support Mempool Current Core Virtual Loadable Module VLM Programs NetWare DOS Requester Option Module Name Description Current Non-Core Virtual Loadable Module Programs Compatibility with NetWare Shell Parameters Packets Parameters and Values Status Managing the NetWare DOS Requester Condition ExplanationVLM=C\NWCLIENT\CONN.VLM Optimizing the NetWare DOS Requester VLM /C=C\NWCLIENT\NET.CFGBest Performance NetWare DOS Requester Option Best Conventional Memory Usage This entry indicates the following Best Compromise Parameters and Values NetWare DOS Requester Option Modules Auto Large TABLE=on off Default Range Modules Default ModulesAuto RECONNECT=on off AUTO.VLM, NDS.VLM Average Name LENGTH=number Bind RECONNECT=on off AUTO.VLM, BIND.VLMBroadcast RETRIES=number Broadcast TIMEOUT=number Broadcast Send DELAY=numberBetween performing any function Serial links on your network Cache Buffer SIZE=number Cache WRITES=on off IPXNCP.VLM, NWP.VLM CHECKSUM=number VLM.EXE Confirm Critical Error ACTION=on off CONNECTIONS=number Sets the name of the operating system used in the shellAUTO.VLM, CONN.VLM, FIO.VLM, NDS.VLM SECURITY.VLM DOS NAME=name GENERAL.VLM, NETX.VLM MsdosEOJ=on off NETX.VLM, REDIR.VLM Range Modules Exclude VLM=pathvlmFirst Network DRIVE=driveletter GENERAL.VLM, NETX.VLM, REDIR.VLM Force First Network DRIVE=on off Handle NET ERRORS=on off Large Internet PACKETS=on off Process across slow links Starting LIP negotiationsConnection table in an Upper Memory Block UMB, if available LIP Start SIZE=number Load LOW CONN=on off Load LOW REDIR=on off Load LOW IPXNCP=on off Local PRINTERS=number Lock RETRIES=number Lock DELAY=number Long Machine TYPE=name IBM-PC Allow several applications to run simultaneouslyMAX TASKS=number Message LEVEL=number Default Range Message TIMEOUT=number Name CONTEXT=namecontext Minimum Time to NET=number Netware PROTOCOL=netwareprotocollist Network PRINTERS=number PB BUFFERS=number Sets the read buffer size in bytes for MS WindowsFIO.VLM, IPXNCP.VLM Pburst Read Windows SIZE=number Sets the write buffer size in bytes for MS Windows Preferred TREE=treename Print Buffer SIZE=number Preferred WORKGROUP=workgroupname Print TAIL=number Print HEADER=number Read only COMPATIBILITY=on off Search MODE=number RESPONDER=on off Syntax Search mode=number Default Modules SET Station TIME=on off Short Machine TYPE=nameIBM Show DOTS=on off REDIR.EXESignature LEVEL=number Syntax True commit=on off Default Off Modules = Enabled but not preferred = Preferred = RequiredNWP.VLM, SECURITY.VLM True COMMIT=on off USE DEFAULTS=on off VLM=pathVLM Workgroup NET=workgroupnetaddress 102 Available Parameters and Values for the Protocol IPX Option Protocol IPX Option INT64 on off Bind LANdrivername #number INT7A on off IPX Packet Size Limit number Ipatch byteoffset, value Syntax IPX Sockets number IPX Retry Count number 108 Available Parameters and Values for the Protocol SPX Option Protocol SPX Option Minimum SPX Retries number SPX Abort Timeout number SPX Connections number SPX Listen Timeout number SPX Verify Timeout number Protocol SPX Option 113 LAN Protocol Tcpip OptionNbadapter 0 Nbbrdcast 0 LAN Drivers Nobootp Bind odidriver number frametype networkname IP Addresses Ipaddress ipaddress networkname Speciﬁes the IP address for your client workstation Ipnetmask netmaskaddress networkname Speciﬁes the default subnetwork mask if subnetworks are used Iprouter ipaddress networkname Connection Sockets Tcpsockets number Transmission Control Protocol TCP Sockets Udpsockets number User Datagram Protocol UDP Sockets Rawsockets number Raw Sockets Additional Support Path Tcpcfg drive path Transport Provider IPX UDP Transport Provider IPX UDP Option Trap Target ipxaddress ipaddress Transport Provider IPX UDP Option 128 Command Line Parameters Reference Command Line Parameters Reference Programname Convention Explanation Core NetWare Client Software Explanation of the Core NetWare Client SoftwareSoftware Explanation Parameter Option Explanation IPXODI.COM This command indicates the following Syntax for using these parameters is as follows VLM.EXE ODI LAN driver.COM VLM /D /C=C\NWCLIENT\NET.CFG /PS=SALES /MC This command indicates the following Dosnp Software System Messages System Messages System Messages System Messages System Messages System Messages DOSCLINST-1.0-1 Filename could not be installed Action Delete unnecessary ﬁles from the hard disk DOSCLINST-1.0-3 The INSTALL.OVL ﬁle could not be found System Messages System Messages System Messages System Messages System Messages System Messages IPXNCP.VLM System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages System Messages VLM-1.00-9 The VLM.EXE ﬁle is testing the VLMs System Messages System Messages VLM-1.00-37 The VLM.EXE ﬁle is using expanded memory EMS VLM-1.00-39 The VLM.EXE ﬁle is using extended memory XMS System Messages Try one or more of the following System Messages System Messages Index Enable Control Community Lock Delay NetWare DOS Requester Monitor Community Desktop Snmpenableauthentrap Unix conventions, explained commands Index