HP UX Internet and Networking Software manual NET.CFG Options Desktop snmp, Link driver drivername

NET.CFG Options Reference

Using NET.CFG Options and Parameters

Table 2-1	NET.CFG Options
desktop snmp
asynchronous timeout number		20 ticks
control community [“ name public private”]		public
enable control community [specified any off omitted]		specified
enable monitor community [specified any off omitted]		specified
enable trap community [specified off omitted]		specified
monitor community [“ name public private”]		public
snmpenableauthentrap [on off]		off
syscontact “ contact”		(none)
syslocation “ location”		(none)
sysname “ name”		(none)
trap community [“ name public private”]		public
link driver driver_name
alternate		(none)
bus name number		(autodetect name), -1 (0FFh)
dma [#1 #2] channel_number		#1, 3
frame frame_type_name [addressing_mode]		~
irq [#1 #2] interrupt_request_number		#1, 3
max frame size number		1024
mem [#1 #2] hex_starting_address [hex_length]		#1, D000, ~
node address hex_address [mode]		(none)
port [#1 #2] hex_starting_address [hex_number_of_ports]		#1, 300, ~
protocol “ name”	hex_protocol_id frame_type	(none)
slot number		1
link support
buffers communication_number [buffer_size]		0, 1130
max boards number		4
max stacks number		4
netware dos requester
auto large table=[on off]		off
auto reconnect=[on off]		on
auto retry=number		0
average name length=number		48
bind reconnect=[on off]		off
broadcast retries=number		3

2-8