HP UX Internet and Networking Software manual Minimum Time to NET=number, Name CONTEXT=namecontext

NET.CFG Options Reference

NetWare DOS Requester Option

MINIMUM TIME TO NET=number

Overrides the time-to-net value defined by the local router during connection.

This parameter is used for bridged WAN/Satellite links with time-to-net values set too low for workstations to make a connection under either of the following conditions:

•The server on the other side of the link is a NetWare 3™ or earlier server not running the Packet Burst™ protocol

•The transfer rate for the link is 2400 baud or less

Syntax	minimum time to net=number
	Replace number with the number of milliseconds
	(1000=one second) needed for maintaining a
	connection over bridges and routers.
Default	0
Range	1 to 65535
Modules	IPXNCP.VLM
Example	To increase the time-to-net value for a 2400-baud link to 10
	seconds, you would place the following lines in your
	NET.CFG file:
	netware dos requester
	minimum time to net=10000

NAME CONTEXT=“name_context”

Allows you to set your current position, or context, in the Directory tree structure.

This parameter and value apply only to client workstations connecting to a NetWare 4 network.

The default is the root, which might cause confusion if duplicate usernames exist.

2-85