System Messages

Explanation: The configuration file contains a parameter that has an invalid value or that does not specify a value. This invalid line is ignored by the configuration process.

Action: No action is required at this point. However, to avoid this message the next time the VLM.EXE file is loaded, delete or correct the line specified by the error message.

REDIR-1.00-43: There is a missing or invalid ON/OFF value for ‘<parameter>’ on line <number> of the configuration file. This entry will be ignored. Correct the line specified in the configuration file before continuing.

Explanation: The configuration file contains a parameter that is defined to use either an ON or OFF value, but a different value or no value has been specified. This invalid line is ignored by the configuration process.

Action: No action is required at this point. However, to avoid this message the next time the VLM.EXE file is loaded, delete or correct the line specified by the error message.

REDIR-1.00-45: The parameter specified for the following option was out of range and has been adjusted.

Explanation: A configurable parameter has been configured too high or too low to be valid. The parameter is specified on the line following the message.

Action: Check and correct the parameter specified in the NET.CFG file. See Chapter 2, “NET.CFG Options Reference,” for more information.

RSA-1.00-1: The message file <name> is invalid. The program cannot be loaded.

Explanation: The .MSG file is invalid. This problem could be the result of a corrupted file, a bad translation, or an outdated file version.

Action: Either update the .MSG file with a valid copy or delete the file. The NetWare® DOS Requester™ software uses the default messages that are bound to the binary files.

RSA-1.00-5: <Module1>.VLM is not loaded. The <module2>.VLM file cannot be loaded before <module1>.VLM. Load the <module1>.VLM file first then try to load the <module2>.VLM file.

4-26